Package Checklist; Documentation Conventions - D-Link DIS-100E Series Quick Installation Manual

Overview
The DIS-100E Series Unmanaged Industrial Fast Ethernet Switch solutions are designed for supporting
standard industrial applications without complex setup, allowing for a truly plug-and-play network.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.

Package Checklist

Please verify that the box contains the following items:
Item
Unmanaged switch
Wall-mount plates
DIN rail clip
M4 Screws
(for the wall mount plates & DIN clip)
DC power terminal block
RJ-45/SFP protective cap
Quick Installation Guide
Safety Instructions
When a connector is removed during installation, testing, or servicing, or when an energized fiber is broken,
a risk of ocular exposure to optical energy that may be potentially hazardous occurs, depending on the laser
output power.
The primary hazards of exposure to laser radiation from an optical-fiber communication system are:
Damage to the eye by accidental exposure to a beam emitted by a laser source.
•
Damage to the eye from viewing a connector attached to a broken fiber or an energized fiber.
•

Documentation Conventions

The following conventions are used in this quick installation guide to emphasize information that will be of
interest to the reader.
DANGER — The described activity or situation might or will cause personal injury.
NOTE — The information supplements the text or highlights important points.
Quantity
1
2
1
4
1
2 – 4
1