Detector Head - Bosch F220 Series Installation Manual

20 en | Install the Detector Heads
4.1.3

Detector Head

CAUTION! The mounting skirts and detector heads are
!
keyed. Do not force them onto the mounting bases.
Install:
Install the detector head by lining up the LED on the detector
head (refer to Figure 4.2, Item 6 on page 19) with the bar on the
mounting skirt (refer to Figure 4.2, Item 7). Turn the detector
head clockwise until the LED aligns with the T mark on the
mounting skirt (refer to Figure 4.2, Item 8).
Remove:
Remove the detector head by turning it counter-clockwise. If
the optional locking bar is used, refer to Figure 4.3.
1.
Fig. 4.3 Unlocking the Locking Bar
4998138694 -04 | 2007.01
Insert screwdriver through the
locking port and depress the
locking bar.
Installation Manual
F220 Series Detectors with F220-B6/C/E/R Bases
2
1
2. Hold the locking bar down
while turning the head
counter-clockwise until
disengaged.
Bosch Security Systems, Inc.