Bosch F220 Series Installation Instructions Manual

Bosch F220 Series Installation Instructions Manual

Photoelectric smoke/heat detectors
Hide thumbs Also See for F220 Series:

Advertisement

Quick Links

F220 Series
Installation Instructions
EN
Photoelectric Smoke/Heat
Detectors

Advertisement

Table of Contents
loading

Summary of Contents for Bosch F220 Series

  • Page 1 F220 Series Installation Instructions Photoelectric Smoke/Heat Detectors...
  • Page 2: General Information

    A black circle around the thermistor. F220-190F understand NFPA-72, The National Fire Alarm Code before installation. Use with F220 Series bases to provide general property protection. This document covers mounting, wiring, power requirements, testing, and maintenance for the bases The F220-135, F220-135F and F220- and detectors: 190F are not life safety devices.
  • Page 3 F220 Series | Installation Instructions | 1.0 General Information EN | 3 2. When the LED flashes red, place the magnet near 1.6.2 Normal sensitivity LED flash example (see the “T” again. Figure 2) 3. Hold the magnet against the “T” on the detector 1.
  • Page 4 F220 Series | Installation Instructions | 2.0 Product family description EN | 4 2.0 Product family description Figure 3: Normal Sensitivity example of LED flashes for CleanMe Table 3: Product Family Description F220-P Photoelectric smoke detector only, requires base. F220-PTH Photoelectric smoke detector w/integral 135°F (57°C) heat sensor, requires base...
  • Page 5 F220 Series | Installation Instructions | 3.0 Mounting EN | 5 3.0 Mounting 4.0 Wiring information Mounting the Two-wire Detector Wiring Information F220-B6RS/B6/B6R/B6C/B6E Table 4: 2-wire Terminal Functions (see Figure 4) Detector Bases 1. Follow NFPA-72 guidelines for mounting locations.
  • Page 6 F220 Series | Installation Instructions | 4.0 Wiring information EN | 6 Four-wire detector wiring information If using the optional DRA-5 Remote Alarm Indicator, connect the positive (red) lead to terminal b1 and the negative lead (white) to terminal c.
  • Page 7 F220 Series | Installation Instructions | 4.0 Wiring information EN | 7 Wiring the F220-B6E Wiring the F220-B6R The F220-B6E base has a normally open alarm loop The F220-B6R is the standard base for four-wire relay and an auxiliary set of normally open contacts.
  • Page 8 F220 Series | Installation Instructions | 4.0 Wiring information EN | 8 Wiring the F220-B6RS 135/135F/190F/P/PTH/PC/PTHC Heat/Photoelectric Smoke Detectors The alarm loop relay (Terminals NO and C) is a Form A relay rated 0.5 A use at 60 VDC 1. Mount and wire the base according to its instructions.
  • Page 9 F220 Series | Installation Instructions | 5.0 F220-B6RS Features EN | 9 5.0 F220-B6RS Features Figure 11: Mounting the detector on the base skirt Configuration On the sounder base is a four position DIP switch. Table 9: F220-B6RS Sounder Base Configuration...
  • Page 10 F220 Series | Installation Instructions | 6.0 Testing the installation EN | 10 12. Test each detector to ensure it causes a control Table 10: Interconnected Units (five units total) panel alarm. Reset the control panel after each test. Maximum Wire Length To alarm the F220-135/135F/190F Detectors either: •...
  • Page 11: Visual Check

    F220 Series | Installation Instructions | 7.0 Maintenance EN | 11 Maintenance 9.0 Visual check These detectors includes the Chamber Check Notify all concerned parties before any Automatic Trouble Indicator, which verifies that the maintenance or testing of the fire alarm detector’s calibration is within the factory listed range.
  • Page 12: Specifications

    F220 Series | Installation Instructions | 10.0 Specifications EN | 12 10.0 Specifications Table 11: F220-135/-135F/-190F Heat Detectors, F220-P/-PTH/-PC/-PTHC Photoelectric Smoke Detectors and F220-B6RS/C/R/E Smoke Detector Base Technical Data +32°F to 100°F (0°C to 38°C) Operating Temperature Relative Humidity (non-condensing) (F220-P) 0% to 95% ≥...
  • Page 13 • CleanMe is a trademark of GE Interlogix. • ChamberMaid and Chamber Check are a trademarks of Bosch Security Systems • TECHSPRAY is a registered trademark and ENVI-RO-TECH is a trademark of Tech Spray L.P. Bosch Security Systems | 8/05 | 4998138694D...
  • Page 14 F220 Series | Installation Instructions | Notes: EN | 14 Notes: Bosch Security Systems | 8/05 | 4998138694D...
  • Page 15 F220 Series | Installation Instructions | Notes: EN | 15 Notes: Bosch Security Systems | 8/05 | 4998138694D...
  • Page 16 Bosch Security Systems 130 Perinton Parkway Fairport, NY 14450-9199 Customer Service: (800) 289-0096 Technical Support: (888) 886-6189 © 2005 Bosch Security Systems 4998138694D...

Table of Contents