Contrast Adjustment; Dimmer; Time Setting For Removing The Faceplate; Clean Reception System Circuit (Crsc) - Kenwood KDC-V7017 Instruction Manual

M
Scan Mode
M
SRC Mode
(Changing colors depending on the source being played)
M
Time Mode
(Color changes every six hours)
M
Situational Mode off
When Situational Mode is off, the original color setting
resumes.
5
To finely adjust blue: (Blue Adjust Mode)
Press the #3 button for at least two seconds to enter the
blue adjust mode.
The 4 and ¢ buttons are used to adjust the blue color
tones, respectively.
Press the #3 button to end the blue adjust mode.
6
To store the color setting in the memory:
(color preset memory)
After adjusting the illumi colors, press the #5 button for two
seconds to store the color setting in the memory.
Pressing the #5 button again recalls the stored colors from the
memory.
NOTE
Blue Adjust mode setting can't do memory
7
Press the MENU button to end the Variable Illumination Color
Setting mode.

Contrast Adjustment

This adjustment permits easy viewing of the display.
Display and setting:
"Contrast 0" – "Contrast 10"
NOTE
The initial setting value is "5".

Dimmer

You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer wire
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.

Time setting for removing the faceplate

You can set the interval during which the open control panel
cannot reverse to be hidden. During the period you have set,
the faceplate can be removed from the faceplate bracket.
Display and setting:
"Off Wait" : 0s / 3s (Default setting) / 5s / 10s / 15s / 20s / 25s
(s=seconds)

Clean Reception System Circuit (CRSC)

<In FM reception of Tuner mode>
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
Display and setting:
"CRSC ON" : The CRSC is on. (Default setting)
"CRSC OFF" : The CRSC is off.
NOTE
Strong electrical fields (such as from power lines) may cause
unstable sound quality when CRSC is turned on. In such a
situation, turn it off.
— 25 —