Cd/External Disc Control Features; Playing Cds - Kenwood KDC-V7017 Instruction Manual

CD/External disc control features

SCAN RDM REP
KDC-V7017
Track number
KDC-716S
Track number
IN indicator
38 0
+
SRC
DISC
4 –
¢
M.RDM DISP /
DISC
NAME.S
Track time
Disc number
IN indicator
Track time
Disc number
— 16 —

Playing CDs

Playing CDs:
Press the 0(EJECT) button to slide open the faceplate,
showing the CD (insertion) slot. Holding the CD with the
labeled side facing up, insert it in the slot. The faceplate will
close, and the CD will start playing.
The IN indicator will light when a CD has been inserted.
Playing CDs Already Inserted:
Press the SRC button repeatedly to select the CD mode.
"CD" is displayed when the CD mode has been selected.
The CD will start playing.
Pausing and Restarting CD Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
Eject:
Press the 0(EJECT) button. The faceplate will slide to eject the
CD.
Press the 0(EJECT) button to close the faceplate.
2CAUTION
• Do not attempt to insert a CD into the slot if another one is
already there.
• The unit can only play 5 in. CDs. If you insert a 3 in. CD, it will
get stuck inside and can cause the unit to malfunction.
• When the faceplate has been slid open, it might interfere with
the shift lever or something else. If this happens, pay attention
to safety and move the shift lever or take an appropriate action,
then operate the unit.
NOTE
• The sound will be temporarily muted while the faceplate is
moving.
• When you load a CD and eject it right away, the next time you
try to insert the CD may not load. In such a situation, take the
CD out for a moment and then reinsert it.