Direct Access Tuning; Itunes Tagging - Kenwood KDC-BT945U Instruction Manual

Display Overview
"Settings"
"Seek Mode" Selects the tuning mode of the radio.
"Auto1": Automatic search for a station.
"Auto2": Search in order of the stations in the
Preset memory.
"Manual": Normal manual tuning control.
"Auto Memory" Memorizes 6 stations with good reception
automatically.
Refer to
"Receive Mode" Sets the receive mode of the HD Radio receiver.
"Auto": Automatically tunes to analog broadcast
"Digital": Digital broadcasts only.
"Analog": Analog broadcasts only.
"TAG Memory" Displays the tag memory usage of HD Radio
receiver. Up to 50 tags can be registered to
this unit.
"0"/"50"
"Tagging" Turns ON / OFF the tag memory function of HD
Radio receiver.
"OFF"/"ON"
5
Make a setting
Press the [4] or [¢] button.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Function of remote control

Direct Access Tuning

Tuning in a desired radio station by entering the
frequency.
1
Select the radio band
2
Enter Direct Access Tuning mode
Press the [DIRECT] button.
"– – – –" is displayed.
3
Select Tuning item
Press the [DIRECT] button.
Pressing the [DIRECT] button each time switches
the following tuning items as follows.
Items
Frequency
Channel
Cancelling Direct Access Tuning
4
Enter the frequency or Channel
Press the number buttons.
Example of frequency input:
<Auto Memory Entry> (page 58)
when there is no digital broadcast.
( : Factory setting)
Display
"– – – –"
"HD –"
—
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
5
Tune in to the entered frequency
Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.

iTunes Tagging

Using an iTunes Tagging enabled HD Radio receiver
you can tag your music. When you hear a song you
enjoy on your local HD Radio station, you only have
to press the [SEARCH MODE] button. The song's
information will then be saved on this unit. The
saved songs will then show up in a playlist called
"Tagged" in iTunes the every next time you sync
your iPod to your computer. So then you just need
to click and then easily buy and download the song
you were tagging directly from the Apple iTunes
Music Store.
1
Enter iTunes tagging mode
Press the [SEARCH MODE] button.
" " will be indicated on the display when song
TAG
information can be registered.
⁄
• Turn "ON" the "TAGGING" of <HD Radio™ Setting> (page
58) when using this function.
• Up to 50 TAGs (song's information) can be registered to
this unit. When iPod is connected, the TAG information
registered to this unit is transferred to the connected
iPod.
• The memory usage can be checked by selecting "TAG
MEMORY" of <HD Radio™ Setting> (page 58).
Press button
[9], [2], [1]
[8], [1], [0]
59
|
English