Demonstration Mode Setting; Muting Volume Upon Reception Of Phone Call - Kenwood KDC-BT945U Instruction Manual

"Built in AUX" When this is set to ON, AUX source can be
selected.
"ON": Allows AUX source to be selected. Use
this setting when the built-in AUX terminal
is connected to the external equipment all
the time.
"OFF": Disable AUX source selection. Use this
setting when the built-in AUX terminal is
not used.
"Forced CD-DA" Sets the method for reading CD.
"Settings 1": Automatically distinguishes
between audio file disc and music CD when
playing disc.
"Settings 2": Forces playing as music CD.
"Favorite Delete" Deletes Favorite Preset Memory.
Refer to
(page
"Built in AMP" Selecting "OFF" turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
"OFF"/ "ON"
"DSI" DSI (Disabled System Indicator) of the unit blinks
when the faceplate is removed.
"OFF"/ "ON"
5
Make a setting
• When the " " icon is displayed (at the
PUSH
right edge of the display)
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
• When the " " icon is not displayed
PUSH
Press the [4] or [¢] button to select a
setting value.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
<Favorite Preset Memory Delete>
46).
( : Factory setting)

Demonstration mode Setting

Turning the demonstration mode ON/OFF.
1
Enter Menu List mode
Press the [MENU] button.
2
Enter Demonstration mode setting
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "DEMO Mode".
3
Set the Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "ON" or "OFF".
4
Exit Menu List mode
Press the [MENU] button.
Function of KDC-X794/ KDC-MP745U
Muting volume upon reception of
Phone call
The audio system automatically mutes when a call
comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (page
70).
35
|
English