Customization Of Spectrum Analyzer Display Mode; Display Setting; Illumination Color Selection - Kenwood KDC-BT945U Instruction Manual

Display Settings
Customization of Spectrum Analyzer
Display Mode
You can customize the display of the Spectrum
analyzer display mode.
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Menu List mode
Press the [MENU] button.
3
Enter the Display Setting mode and select the
Spectrum analyzer display mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Settings" "DISP & ILLUMI"
>
Select" "Type Select"
display mode.
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Setting
"Display Select"
"Type Select" Selects the Spectrum analyzer display mode.
"Graphic Changes the display of the Spectrum analyzer
Select" display mode.
"Text Select" Sets the text display.
5
Make a setting
Press the [4] or [¢] button.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
32
|
KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
>
"Display
>
Spectrum analyzer
Function of KDC-X994

Illumination Color Selection

Selecting the Illumination Color of the panel.
1
Enter Menu List mode
Press the [MENU] button.
2
Enter Illumination color selection mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Settings" "DISP & ILLUMI"
Select".
3
Select the place where you want to set the
Illumination Color
Turn the [VOL] knob and press it when the
desired item is displayed.
Place
Display and key
Display
Key
4
Select the Illumination Color
Turn the [VOL] knob and press it when the
desired item is displayed.
Select the color from "Variable Scan"/ "Color1" —
"Color 10"/ "User".
Creating "User" color
You can create your original color during the
selection from "Color1" — "Color10. "
The color you created can be called when you
select "User".
1. Press the [VOL] knob for at least 1 second.
Enter the detail color adjustment mode.
2. Set the color.
Operation type
To select the color to adjust.
(red, green, or blue)
To adjust color.
(Range: 0 – 9)
3. Press the [VOL] knob.
Exit the detail color adjustment mode.
5
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
>
"Color
Display
"All"
"Display"
"Key"
Operation
4 ¢
Press the [ ] or [ ] button.
Turn the [VOL] knob.