Bluetooth Setup; Bluetooth Setting - Kenwood KDC-BT945U Instruction Manual

Function of KDC-X994/ KDC-BT945U
KDC-X794/ KDC-MP745U with KCA-BT200 (Optional Accessory)

Bluetooth Setup

MENU VOL
4 38 ¢

Bluetooth Setting

You can select following Bluetooth Setting items.
1
Enter Bluetooth mode
KDC-X994 KDC-BT945U
Press the [ ] button.
KDC-X794 KDC-MP745U
Press the [PLAY MODE] button for at least 1
second.
✍ You can also select from "Settings" in Menu List
mode.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "BT Settings".
3
Select the Menu item
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
"BT Settings"
"Phone Selection" Select a cell-phone or Bluetooth audio player
connection.
"Audio Selection"
Refer to
Wish to Connect> (page
"SMS Download" Download a short message.
Refer to
"SMS Inbox" Display the received short message.
Refer to
(page
"Voice Tag" Registers voice for voice recognition and voice
to select the Phone number category in Phone
book.
- Adding a Voice Dialing Command (page 52)
- Setting a Voice Command for Category (page
52)
"Detailed Setup" Move to detailed item.
"Device Regist. " Register a Bluetooth device (pairing).
Refer to
"SPCL DVC
(page
Select"
"Device Delete" Cancel registration of the Bluetooth device.
Refer to
device> (page
48
|
KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
/PLAY MODE
<Selecting the Bluetooth device You
50).
<Downloading the SMS> (page
<SMS (Short Message Service)>
54).
<Registering Bluetooth device>
49).
<Deleting a Registered Bluetooth
51).
"PIN Code Edit" Specify the PIN code required when registering
"Auto Answer" Answer a call automatically after lapse of the
"Bluetooth HF/
Audio"
"Call Beep"
"BT F/W Update" Display the version of the firmware of this unit.
"Mic Gain"*
"NR Level"*
"Echo Cancel
LV"* 1
* 1 Function of KDC-X994/ KDC-BT945U
4
Make a setting
• When the "
right edge of the display)
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
54).
• When the "
Press the [4] or [¢] button to select a
setting value.
5
Exit BT Settings mode
KDC-X994 KDC-BT945U
Press the [
KDC-X794 KDC-MP745U
Press the [PLAY MODE] button for at least 1
second.
Remarks
• "Auto Answer" (Setting the Time Interval for Automatic
Answer)
This function automatically answers (responds to) a call
after lapse of the preset time interval for automatic answer.
"OFF" : Does not answer the phone call automatically.
"0" : A utomatically answers the phone call at once.
this unit using the Bluetooth device.
Refer to <Registering PIN Code> (page
preset time interval for automatic answer.
"OFF"/ "0s" – "8s" – "99s"
You can specify output speakers for hands-free
voice communication and Bluetooth audio
sound.
"FRONT": Outputs voice from the front
speakers.
"ALL": Outputs voice from the front and rear
speakers.
You can output a beep from the speaker when
a call comes in.
"ON": Beep is heard.
"OFF": Beep is canceled.
1 Adjust the sensitivity of the microphone for a
telephone call. Adjust the voice of caller. Setting
to "+" increases the voice volume.
"–3" – "0" – "+3"
Reduce the noises generated by surrounding
1
environment without changing the microphone
volume. Adjust the voice of caller when it is
not clear. Setting to "+" increases the noise
reduction.
"–3" – "0" – "+3"
Adjust the level of echo cancellation. Setting to
"+" increases the echo cancel reduction.
"–2" – "0" – "+2"
( : Factory setting)
" icon is displayed (at the
PUSH
" icon is not displayed
PUSH
] button.
50).