Dispensing Hot Water - Gaggia MAGENTA MILK RI8701 Operating Instructions Manual

QUICK MILK CLEAN
to start press
4219-465-02541 MAN. GAG. MAGENTA Milk EN-NL-PL Rev 03.indd 15
3 Place a cup or a glass under the Coffee dispensing spout and the Capp in Cup
system.
4 Press the HOME
button and choose the desired beverage from the menu.
- Press the button corresponding to the desired beverage.
- Press the START/STOP
age.
5 The machine dispenses a default amount of coffee and frothed milk into the
cup or the glass. Depending on the beverage chosen, either coffee or frothed
milk will be dispensed first.
If you wish to customise the settings of a specific beverage, please refer to the
"Beverage customisation" chapter.
6 After dispensing your coffee-based and frothed milk beverages, it is best to
complete the quick cleaning procedure of the milk circuit within 10 seconds.
However, the procedure can also be carried out later by accessing the cleaning
menu via the CLEAN/SET
the "QUICK CLEAN" option. Then press the "
Then, follow the instructions shown on the display.
Note:We suggest that you carry out a quick clean at least once a day and that you
rinse the Capp in Cup system Spout under running water.
Press the START/STOP
procedure later.

Dispensing hot water

Warning: when preparation starts, the steam tube may spray steam and hot water.
Remove the Capp in Cup system and place a container under the steam tube.
1
Press the HOME button, browse the various screens using the green "
2
button, and select hot water.
button to start dispensing the selected bever-
button. Press the "CLEAN" button and select
" button.
button to confirm, or " " to carry out the
English 15
"
21/01/2021 11:33:04