Miele KM 7200 FR Operating And Installation Instructions page 9


For safety reasons, this cooktop may only be used after it has
been built in.

This appliance must not be installed and operated in mobile
installations (e.g. on a ship).

Never open the casing of the cooktop.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.

The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele authorised service technician.

Faulty components must only be replaced by genuine Miele spare
parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.

The cooktop is not intended for use with an external timer switch
or a remote control system.

The cooktop must be connected to the electricity supply by a
qualified electrician (see "Installation – Electrical connection").

If the mains connection cable is damaged, it must be replaced
with a special mains connection cable by a qualified and competent
electrician in order to avoid a hazard (see "Installation - Electrical
connection").

During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:
- the mains circuit breaker is switched off, or
- it is switched off at the wall socket and the plug is withdrawn from
the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.
Warning and Safety instructions
9