Connect The Cables To The Base - JVC TK-C205VP Instructions Manual

Connect the Cables to the Base

E-12
Video signal cables
Connect the coaxial cables to the coaxial
cable processing terminal.
Note
Use the RG-59 or RG-6 video signal cable
(coaxial cable). The RG-11 cannot be
used.
• Perform the process shown on the left
diagram (above illustration) for the
coaxial cable tip before connecting.
DC 12 V or AC 24 V power supply cable
Connect a DC 12V or AC 24V power supply
cable to the power supply terminal. To pre-
vent connection errors or a cable disconnec-
tion, we recommend the use of lug plates for
the connections.
The following table shows the connection dis-
tances and connection cables provided that
2-conductor VVF cables (vinyl-insulated vi-
nyl sheath cables) are used.
100 m 260 m 410 m
Maximum extension
(330ft) (850ft) (1300ft) (1640ft)
Conductor 1.0mm 1.6mm 2.0mm 2.6mm
diameter (AWG18) (AWG14) (AWG12) (AWG10)
500 m