Epson DS-790WN User Manual page 143

Hide thumbs Also See for DS-790WN:
Table of Contents

Advertisement

Required Settings for Scanning
Items
Administrator DN / User Name
Password
Kerberos Settings
If you select Kerberos Authentication for Authentication Method of LDAP Server > Basic, make the following
Kerberos settings from the Network tab > Kerberos Settings. You can register up to 10 settings for the Kerberos
settings.
Items
Realm (Domain)
KDC Address
Port Number (Kerberos)
Configuring the LDAP Server Search Settings
When you set up the search settings, you can use the email address registered to the LDAP server.
1. Access Web Config and select the Network tab > LDAP Server > Search Settings.
2. Enter a value for each item.
3. Click OK to display the setting result.
The settings you have selected are displayed.
LDAP Server Search Setting Items
Items
Search Base (Distinguished Name)
Number of search entries
>
Making Contacts Available
Settings and Explanation
Enter the user name for the LDAP server in 128 characters or less in Unicode
(UTF-8). You cannot use control characters, such as 0x00-0x1F and 0X7F. This
setting is not used when Anonymous Authentication is selected as the
Authentication Method. If you do not specify this, leave it blank.
Enter the password for the LDAP server authentication in 128 characters or less in
Unicode (UTF-8). You cannot use control characters, such as 0x00-0x1F and 0X7F.
This setting is not used when Anonymous Authentication is selected as the
Authentication Method. If you do not specify this, leave it blank.
Settings and Explanation
Enter the realm of the Kerberos authentication in 255 characters or less in ASCII
(0x20-0x7E). If you do not register this, leave it blank.
Enter the address of the Kerberos authentication server. Enter 255 characters or
less in either IPv4, IPv6 or FQDN format. If you do not register this, leave it blank.
Enter the Kerberos server port number between 1 and 65535.
Settings and Explanation
If you want to search an arbitrary domain, specify the domain name of the LDAP
server. Enter between 0 and 128 characters in Unicode (UTF-8). If you do not
search for arbitrary attribute, leave this blank.
Example for the local server directory: dc=server,dc=local
Specify the number of search entries between 5 and 500. The specified number of
the search entries is saved and displayed temporarily. Even if the number of the
search entries is over the specified number and an error message appears, the
search can be completed.
143
>
Cooperation between the LDAP Server an
...

Advertisement

Table of Contents
loading

Table of Contents