Epson DS-790WN User Manual page 137

Required Settings for Scanning
Destination Setting Items
Items
Common Settings
Name
Index Word
Type
Assign to Frequent Use
Email
Email Address
Network Folder (SMB)
Save to
User Name
Password
FTP
Secure Connection
Save to
User Name
Password
Connection Mode
Port Number
>
Making Contacts Available
Settings and Explanation
Enter a name displayed in the contacts in 30 characters or less in Unicode
(UTF-16). If you do not specify this, leave it blank.
Enter a name using 30 characters or less in Unicode (UTF-16) to search the
contacts on the scanner's control panel. If you do not specify this, leave it blank.
Select the type of the address that you want to register.
Select to set the registered address as a frequently used address.
When setting as a frequently used address, it is displayed on the top screen of
scan, and you can specify the destination without displaying the contacts.
Enter between 1 and 255 characters using A-Z a-z 0-9 ! # $ % & ' * + - . / = ? ^ _ { | }
~ @.
\\"Folder path"
Enter the location where the target folder is located between 1 and 253 characters
in Unicode (UTF-16), omitting "\\".
Enter the network path displayed on the folder's property screen. See the
following for details on setting the network path.
"Example of Configuration for a Personal Computer" on page 127
Enter a user name to access a network folder in 30 characters or less in Unicode
(UTF-16). However, avoid using control characters (0x00 to 0x1f, 0x7F).
Enter a password to access a network folder between 0 and 20 characters in
Unicode (UTF-16). However, avoid using control characters (0x00 to 0x1f, 0x7F).
Select FTP or FTPS according to the file transfer protocol the FTP server supports.
Select FTPS to allow the scanner to communicate with security measures.
Enter the server name between 1 and 253 characters in Unicode (UTF-16),
omitting "ftp://" or "ftps://".
Enter a user name to access an FTP server in 30 characters or less in Unicode
(UTF-16). However, avoid using control characters (0x00 to 0x1f, 0x7F). If the server
allows anonymous connections, enter a user name such as Anonymous and FTP. If
you do not specify this, leave it blank.
Enter a password to access to an FTP server between 0 and 20 characters in
Unicode (UTF-16). However, avoid using control characters (0x00 to 0x1f, 0x7F). If
you do not specify this, leave it blank.
Select the connection mode from the menu. If a firewall is set between the
scanner and the FTP server, select Passive Mode.
Enter the FTP server port number between 1 and 65535.
137
>
Registering a Destination to Contacts usin
...