Express Timer Programming - JVC HR-XV48E Instructions Manual

Filename [XV48EX_EN_07S-VHS.fm]
XV48EX_EN_01.book Page 26 Saturday, October 9, 2004 10:34 PM
26
EN
Express Timer
Programming
If you do not know the S
HOW
you wish to record, use the following procedure to set your unit
to timer-record the programme.
Before performing Express Timer Programming:
Make sure that the unit's built-in clock is set properly.
Insert a cassette with the safety tab in place. The unit will
come on automatically.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/VCR/DVD switch on the remote control to the
right.
Slide to the
right.
Example: To timer-record the programme from 21:00 to
22:00 on 25th December, on channel 1.
A
Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
B
Access the S
HOW
Press PROG.
C
Access the Programme screen.
Press START +/–. (If you're
just starting out, "P1"
appears.)
Page 26
V number for the programme
IEW
V screen.
IEW
OPERATIONS ON VHS DECK (cont.)
D
Enter the programme start time.
Press START +/– to enter the
time you want recording to
start.
Press and hold START +/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
E
Enter the programme stop time.
Press STOP +/– to enter the time you want recording to
stop.
Press and hold STOP +/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
F
Enter the programme date.
Press DATE +/–.
The current date appears on the TV screen. The date you enter
appears in its place.
G
Enter the channel position.
Press PR +/–.
H
Set the tape speed.
Press p.
I
Set the VPS/PDC mode.
Press VPS/PDC (number key "7") to select "ON" or
"OFF".
If "VPS/PDC ON" is displayed on the TV screen, "VPS/PDC" is
set to "ON".
If "VPS/PDC OFF" is displayed on the TV screen, "VPS/PDC"
is set to "OFF".
"VPS/PDC Recording" on page 25.
J
Return to the normal screen.
Press PROG or ENTER. "PROGRAM COMPLETED"
appears on the TV screen for about 5 seconds, then the
normal screen appears.
Repeat steps B – J for each additional programme.
K
Engage the unit's timer mode.
Press #. The unit turns off automatically and "#"
appears on the front display panel.
To disengage the timer mode, press # again.
Masterpage:Left+
October 9, 2004 10:34 pm