Express Timer Programming - JVC HR-XVS20AA Instructions Manual

34
EN
Express Timer
Programming
If you do not know the G-
CODE
wish to record, use the following procedure to set your unit to
timer-record the programme.
Before performing Express Timer Programming:
Make sure that the unit's built-in clock is set properly.
Insert a cassette with the safety tab in place. The unit will
come on automatically.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/S-VHS/DVD switch to the right.
number for the programme you
OPERATIONS ON S-VHS DECK (cont.)
Example: To timer-record the programme from 21:00 to
22:00 on 25th December, on channel 1.
A
Select the S-VHS deck.
On the unit
Press S-VHS/DVD repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
B
Access the G-
CODE
Press PROG.
C
Access the Programme screen.
Press START +/–. (If you're
just starting out, "P1"
appears.)
D
Enter the programme start time.
Press START +/– to enter the
time you want recording to
start.
Press and hold START +/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
E
Enter the programme stop time.
Press STOP +/– to enter the time you want recording to
stop.
Press and hold STOP +/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
F
Enter the programme date.
Press DATE +/–.
The current date appears on the TV screen. The date you enter
appears in its place.
/S V screen.
HOW IEW
– P1 –
START STOP
– –:– – – –:– –
SP
DATE TV PROG
– –.– – – –
[+/–]
[PROG] : EXIT
– P1 –
START STOP
21:00 – –:– –
SP
DATE TV PROG
– –.– – – –
[+/–]
[PROG] : EXIT