Cleaning & Maintenance; Troubleshoot Guide - NuWave Brio 6Q Owner's Manual

CLEANING & MAINTENANCE CLEANING & MAINTENANCE
Cleaning
Clean the Brio after every use or in between a number of
large batches. The Fry Pan Basket and the Base Tray have
a non-stick coating with a stainless steel Basket Net. Do not
use metal utensils or harsh abrasives when cleaning as this
can damage the coating.
1. Unplug the appliance and make sure it cools completely.
2. Use a damp cloth to wipe the outside of the appliance.
3. Clean the Fry Pan Basket and inside components with a
nonabrasive sponge, hot water, and mild detergent.
Note: Remove the Base Tray and Fry Pan Basket and place
on a heat-resistant surface to help cool the appliance quicker.
Note: If using the dishwasher for the Base Tray, Fry Pan
Basket, and Fry Pan Basket Net, it is recommended to use
top rack only.
Tip: If there is residual food in the Base Tray and Fry Pan
Basket, add some hot water and let it soak separately for
about 10 minutes for easier cleaning. Then, use a soft
cleaning brush to remove any lingering food.
Note: To clean Probe, wipe end with a damp cloth or paper towel.
Storage:
1. Unplug the Brio and let it cool down completely.
2. Make sure that all the parts are clean and dry.
3. Push the power cord into the storing capsule. Affix the
cord by inserting it into the cord-affixing opening in the
back of the unit.
IMPORTANT - Do not immerse unit
in water or attempt to cycle through
dishwasher. The outer surface may
be cleaned by wiping carefully with
a damp dishcloth or sponge.
Make sure unit has cooled
completely prior to cleaning.
In case of other problems, immediately unplug
and contact Customer Service Department.
1-877-689-2838 • help@nuwavenow.com
30 30
cleaning & maintenance
WARNING

TROUBLESHOOT GUIDE

The Brio is not turning on or working.
1. The Brio is not plugged in.
2. Did not press "ON/OFF" button.
3. Base Tray with Fry Pan Basket is not in the Brio.
4. Insert the plug into an appropriate grounded power
socket. Press "ON/OFF" button after settings are
selected. Place the Base Tray with Fry Pan Basket
into the Brio.
The ingredients fried in the Fry Pan Basket are not
completely cooked.
1. Too many ingredients were used. The cooking
temperature is too low.
2. The cooking time is too short.
3. Remove some ingredients from the Fry Pan Basket;
smaller batches air-fry more evenly. Cook at a higher
temperature. Set the Brio to air-fry for a longer time.
The food is fried unevenly.
1. Certain types of ingredients need to be shaken
halfway through the cooking time.
2. Ingredients that are on the top need to be shaken
halfway through the cooking time.
Fried snacks are not crispy when they come out
of the Brio.
1. You used a type of snack meant to be prepared in a
traditional deep fryer.
2. Use snacks designed to be baked in a traditional oven,
or lightly brush some olive oil onto the snacks before
placing into Brio for a crispier result.
Cannot slide the Fry Pan Basket into
the appliance properly.
1. The Fry Pan Basket is overfilled. The Fry Pan Basket is
not placed in the Base Tray correctly.
2. Do not fill the Fry Pan Basket more than 4/5 full. Push
the Fry Pan Basket down into the Base Tray until you
hear a click.
31 31
nuwavenow.com nuwavenow.com