NuWave Brio 37001 - Healthy Digital Air Fryer 6-Qt Manual

NuWave Brio 37001 - Healthy Digital Air Fryer 6-Qt Manual

Advertisement

NuWave Brio 37001 - Healthy Digital Air Fryer 6-Qt Manual

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS
When using electrical units, basic safety precautions should always be followed including the following:

  1. Do not touch hot surfaces. Use handles or knobs.
  2. shock hazard To protect against electrical shock, do not immerse cord, plugs, or the Brio in water or other liquids.
  3. Do not operate the Brio with a damaged cord, plug, or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
  4. Close supervision is necessary when any appliance is used near children. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  5. The use of other accessories that are not intended to be used with the Brio is not recommended. Doing so may damage the Brio and can cause accidents.
  6. NOT INTENDED FOR OUTDOOR USE.
  7. Do not use appliance for other than intended use.
  8. Do not let cord hang over edge of table or counter or touch hot surfaces.
  9. Do not place on a stovetop, near a hot gas, electric burner, or in a heated oven.
  10. Extreme caution must be used when moving the Brio containing hot oil or other hot liquids.
  11. To disconnect, turn the Brio "OFF", then remove plug from the wall outlet.
  12. During air-frying, hot steam is released from the air outlet vent. Keep hands and face at a distance from the steam and from the air outlet vent. Also, be careful of hot steam and air when removing Fry Pan Basket.
  13. Make sure the ingredients prepared in the Brio come out golden brown instead of dark brown and not burnt. Remove any burnt remnants from Fry Pan Basket during cleaning and before each use.
  14. Never put the Brio against the wall or other appliances. There should be at least 3 inches of free space for the back side, left/right sides, and the upper side of the Brio.
  15. Do not place anything on top of the Brio.
  16. Unplug the Brio from outlet when not in use and before cleaning. Allow the Brio to cool before cleaning, putting on or taking off parts.
  17. INTENDED FOR HOUSEHOLD USE ONLY.
  18. Keep manual handy for future reference.

SEE OPERATING INSTRUCTIONS BEFORE USE

Electrical Information

A short power-supply cord (or detachable power-supply cord) is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. If a longer detachable power-supply cord or extension cord is used:

  1. The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance.
  2. shock hazard The longer cord should be arranged so that it will not drape over the countertop or tabletop where it could be pulled on or tripped over unintentionally. The Brio should be operated on a separate electrical outlet from other operating appliances due to wattage limitations. The appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
  3. If the appliance is of the grounded type, the cord set or extension cord should be a grounding-type 3-wire cord.

SAVE THESE INSTRUCTIONS
Read and understand the entire manual before using the Brio.

DO NOT USE THE UNIT FOR OTHER THAN INTENDED USE.
Note:
Put the Brio on a surface that is horizontal, even, and stable. This appliance is intended for normal household use. It is not intended to be used in environments such as kitchen staffs of shops, offices, farms, or other work environments. Nor is it intended to be used by clients in hotels, motels, bed and breakfasts, and non-residential environments.

NOTICE: THE FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS, ADDITIONAL SAFEGUARDS, OR THE INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR BRIO THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK OF SERIOUS INJURY.


In case of other problems, immediately unplug and contact Customer Service Department.
1-877-689-2838 • help@nuwavenow.com

ADDITIONAL SAFEGUARDS

  1. Do not place the Brio close to flammable materials, heating units, or wet environments.
  2. Height of ingredients placed in the Fry Pan Basket should comply with the directions listed under "Operating Instructions."
  3. Do not put any other cooking pans in the Fry Pan Basket. Do not replace any parts with other containers.
  4. It is normal for some smoke to escape the Brio when heating for the first time.
  5. If a lot of smoke is escaping from the air vent during operation, unplug the Brio immediately and contact Customer Service.*
  6. Do not move the Brio while in operation. Only after the Brio has completely cooled should moving be attempted. Always wait for the Air Fryer to cool down prior to handling it.
  7. Children should be supervised to ensure that they do not play with the appliance.
  8. Never use a towel or other material or object to block the air vents.
  9. If any trouble arises during operation, any service MUST be done by NuWave, LLC or authorized by the manufacturer for repairs.
  10. The appliance is not intended to be operated by means of an external timer or separate remote-control system.
  11. Do not disassemble the Brio or replace any parts without prior written consent from the manufacturer.
  12. Do not use metal utensils with the coated Fry Pan Basket or Fry Pan Basket Net as this can damage the surface.
  13. Make sure the Brio is always clean prior to cooking.

*Customer Service Department: 1-877-689-2838 • help@nuwavenow.com

  • Always put the ingredients to be fried in the Fry Pan Basket to prevent direct contact with the heating components.
  • Do not cover the air inlet and outlet openings while the appliance is operating.
  • Do not pour oil into the Base Tray or Fry Pan Basket, as this may create a fire hazard.
  • Never touch the insides of the appliance while it is operating.

PARTS DESCRIPTION

PARTS DESCRIPTION

  1. Air Fryer Power Base
    Part #: 37206
  2. Fry Pan Basket
    Part #: 37202
  3. Fry Pan Basket Net
    Part #: 37204
    1. Fry Pan Divider
      Part #: 37205
    2. 4 Silicone Tabs
      Part #: 37207
  4. Base Tray
    Part #: 37201

OPERATING INSTRUCTIONS

Before First Use

  1. Remove all the packaging materials.
  2. Remove the glue and labels on the appliance.
  3. Clean the Base Tray and Fry Pan Basket with Fry Pan Basket Net thoroughly with hot water, a nonabrasive sponge, and a mild dish detergent, or in the dishwasher, top rack only.
  4. Wipe the inside and outside of the appliance with a wet cloth. Do not immerse the appliance in water. See "Assembling the Brio" under Operating Instructions for more.

Note: This appliance cooks using hot air. DO NOT fill the Fry Pan Basket with oil.

Operation Preparation

  1. Place the appliance on a level, even, and stable heat-resistant surface.
  2. Place the Base Tray and Fry Pan Basket in the Brio. See "Assembling the Brio" under Operating Instructions for more.
  3. Plug the appliance into a standard wall socket. The power plug is included in the package.

Note: Do not cover or block the vent located on the back of the Brio. Doing so can prevent proper ventilation and will adversely affect the cooking results.

On/Off Function

  1. Press "ON/OFF" once to turn the unit on.
    • The control panel should display "0", indicating that no cooking time or temperature has been selected and the unit is powered on.
    • The light above the last used wattage will be on.
  2. Press "ON/OFF" again to turn the unit off, and the last wattage used will be flashing.

Wattage Function

The default wattage of the Brio is 1800 watts.

  1. To change the wattage, press "WATTS" once. The light will illuminate above the "900", indicating that the Air Fryer is now set to 900 watts.
  2. Press "WATTS" once more and the light above "1500" will illuminate. The Air Fryer is now set to 1500 watts.
  3. Press "WATTS" again and the light above "1800" will illuminate, indicating the Air Fryer is now set to the default of 1800 watts.

Note: If you change the wattage from the default 1800W to either 900W or 1500W and unplug or turn off the unit, the Brio will remember the last wattage setting when it is turned back on. The light above that wattage will flash until unit is turned on and then it will remain solid.

Easy Start/Pause Function

  1. Press "START/PAUSE" once to begin cooking. "TIME" will be displayed. "0:15" and the FAN Icon will also be displayed with the ":" and FAN Icon flashing.
    • The Brio will start to countdown. The default is 360°F for 15 minutes.
    • To interrupt the cooking process, press "START/PAUSE".
    • To resume cooking or preheating, press "START/PAUSE" again.
    • Once the Brio finishes cooking, the unit will "beep" three times and the control panel will display "End".

Note: Removing the Base Tray and Fry Pan Basket will also Pause the unit. "OPEN" will be displayed on the control panel. Return the Base Tray and Fry Pan Basket to resume cooking.

Pre-Heat Function

The Pre-Heat function ensures that the Brio reaches the desired temperature before you begin cooking your food. The Pre-Heat function is the perfect choice for foods that require a crisp finish, such as frozen appetizers, French fries or chicken wings.

  1. Press "PRE-HEAT". The control panel will display "PRE-HEAT" and "0". The default for Pre-Heat is 360°F for 15 minutes.
  2. To preheat with the default settings, press "START/PAUSE". The control panel will display "TEMP" and "PRE-HEAT". "360F" and the FAN Icon will flash during pre-heating.
    • Once the preheat temperature is reached, the control panel will display "READY" and "TIME" and the Air Fryer will beep once. "5" will flash and a 5-minute countdown will begin.
    • The unit will maintain the pre-heat temperature during the 5-minute countdown OR until the Fry Pan Basket is removed, whichever comes first.
  3. Once the food has been added to the Fry Pan Basket, insert the Fry Pan Basket back in place. This will start the cooking process at the selected temperature and time.
    • If no temperature or time were selected prior to Pre-heat, the default temperature (360°F) and time (15 minutes) will be used.
    • If nothing is done within the 5-minute countdown, the NuWave Brio will return to the ON setting and "0" will be displayed.

Note: Pre-heat temperature can be adjusted at any time during the preheat process by pressing the arrows above and below the Temp Icon.

  • During cooking, Preheat can be canceled.
  • If the Fry Pan Basket is removed at any point during the preheating stage, the Air Fryer will automatically pause, and start a 5-minute countdown until the Fry Pan Basket is replaced.
  • If nothing is done within the 5-minute countdown, the NuWave Brio will return to the ON setting and "0" will be displayed.
  • If another batch of food is cooked shortly after cooking, the Pre-Heat Function will not need to be used. The unit will already be hot.
  • If longer cooking time is desired, simply place the Base Tray and Fry Pan Basket back into the appliance and continue cooking in 2- to 3-minute increments until desired consistency has been reached.
  1. Press "MENU". The light above "fries" will illuminate and "360F" and "TEMP" will be displayed in the control panel.
  2. Press "START/PAUSE" to begin cooking. The pre-programmed time will begin to countdown.
    • • Remaining cooking time will be displayed in the control panel with "TIME" lit and ":" and the FAN Icon will flash.
  3. To choose a different Menu selection, simply press "MENU" until the desired Menu program is selected BEFORE pressing "START/PAUSE".
  4. To get out of Menu selection, press "MENU" until no lights are lit above the pre-programmed menu selection.
    • • Once the Brio finishes cooking, the unit will "beep" three times and the control panel will display "End".

Note: The default wattage for all Menu selections is 1800 watts.

Food Type Time (minutes) Temp Food Amount (ounces)
Fries (Homemade Thick cut) 25 360˚F 8-12
Frozen Fries (Medium cut) 15 400˚F 28
Chicken Nuggets 8 400˚F 12
Steak (½" ribeye) 12 360˚F 8 oz each
Poultry (Chicken breast) 12 360˚F 8 oz each
Fish (Frozen Fish Sticks) 8 400˚F 12

Using PRE-HEAT with MENU

  • Using Pre-Heat with a Menu selection can be done two ways:

Example #1

  1. Press "PRE-HEAT" then press "MENU".
  2. Choose the desired Menu selection and press "START/PAUSE".
    • The Brio will pre-heat first before cooking.

Example #2

  1. Press "MENU".
  2. Choose the desired Menu selection and then press "PRE-HEAT".
  3. Press "START/PAUSE" The NuWave Brio Healthy Digital 6-Qt. Air Fryer will pre-heat first before cooking.

Adjusting Temperature


The Brio is set to cook at 360°F by default.

  1. To set a different cooking temperature, press the arrows above or below the Temp Icon. The control panel will display "360F" and "TEMP".
  2. To adjust the temperature, continue to press the "Up" or "Down" arrows until the desired cooking temperature is reached.
    • The temperature will adjust in 5-degree increments between 100°F and 400°F.
  3. To quickly adjust the temperature, hold down the arrows until desired cooking temperature is reached.

Note: Cooking temperature can be adjusted at any time before or during the cooking process. Once display is switched to temperature display, it will remain in the temperature display.

Adjusting Time


The Brio is set to cook for 15 minutes by default.

  1. To set a different cooking time, press the arrows above or below the Time Icon. The control panel will display "0:15" and "TIME".
  2. To adjust the time, continue to press the "Up" or "Down" arrows until the desired cooking time is reached. • The time will adjust in 1-minute increments.
  3. To quickly adjust the time, hold down the arrows until desired cooking time is reached.
    • • The time will be adjusted in 10-minute increments, followed by 20-minute increments, followed by 30-minute increments.
  4. The maximum selectable cooking time differs depending on the selected cooking temperature:
    • 100°F - 345°F, maximum cooking time is 99 hours 59 minutes.
    • 350°F - 400°F, maximum cooking time is 1 hour.

Note: Cooking time can be adjusted at any time before or during the cooking process.

Reheat Function

The default setting is programmed at 360°F for 4 minutes at 1800 watts.

  1. Press "REHEAT". The NuWave Brio will automatically begin the reheat process. The control panel will display "REHEAT" and "TIME" and begin a 4-minute countdown.
    • Once the unit finishes reheating, the unit will "beep" three times and the control panel will display "End".

Note:

  • Reheat cooking temperature and time can be adjusted at any time during the reheat process.
  • During cooking, Reheat can be canceled.
  • The Reheat function is perfect for reheating single-portion-sized foods.
  • When using the Reheat function, food can be placed directly in the Fry Pan Basket, any oven-safe dish, or foil.

Assembling the Device


DO NOT use the Brio without the Base Tray and Fry Pan Basket with Net. DO NOT touch the insides of the Base Tray, Fry Pan Basket, and Net immediately after cooking. Parts will be hot. ONLY hold the Base Tray and Fry Pan Basket by the handle.

Removing Base Tray with Fry Pan Basket

  1. Using the handle, pull and slide out the Base Tray and Fry Pan Basket with Net.
    Removing Base Tray with Fry Pan Basket - Step 1
  2. To remove Fry Pan Basket from Base Tray, while holding the handle, push demounting button forward and lift up Fry Pan Basket from Base Tray. When cooking, this will reduce extra weight from Base Tray and make it easier to pour or shake smaller foods.
    Removing Base Tray with Fry Pan Basket - Step 2

Removing the Fry Pan Basket Net

  1. After removing Fry Pan Basket from Base Tray, turn Fry Pan Basket upside down.
  2. Using oven mitts, press the underneath of the Fry Pan Basket Net down until it is released from Fry Pan Basket. Net and its tab will be released from Fry Pan Basket.

Assembling the Fry Pan Basket Net

  1. Place Tab of Fry Pan Basket Net into slot of Fry Pan Basket.
  2. Press other end of Fry Pan Basket Net down until Net snaps into place and is flat inside Fry Pan Basket.

Shaking Food

Some foods require shaking halfway through cooking. To properly shake the food, hold the handle, remove the Base Tray from the appliance, and shake. Once the food has been adequately shaken, slide the Base Tray and Fry Pan Basket back into the NuWave Digital Brio 6-Qt Digital Air Fryer.
Shaking Food

Note: For best results, when cooking, do not fill more than 4/5 full.

DO NOT PUSH THE DEMOUNTING BUTTON FORWARD WHILE SHAKING.

Using the Fry Pan Divider

Make sure all 4 Silicone Tabs are placed on the Divider tabs.

Looking down at the Fry Pan Basket, slide the Divider down the center of the Basket.
Make sure the Divider is between both the groves and screws of the Basket.
To remove Divider, simply slide the Divider straight up.

Divider will be hot from cooking.
You can remove the Silicone Tabs from the Divider when cleaning.
Using the Fry Pan Divider

CARE & MAINTENANCE

Cleaning

Clean the appliance after every use or in between a number of large batches. The Fry Pan Basket and the Base Tray have a non-stick coating with a stainless steel Basket Net. Do not use metal utensils or harsh abrasives when cleaning as this can damage the coating.

  1. Unplug the appliance and make sure it cools completely.
  2. Use a damp cloth to wipe the outside of the appliance.
  3. Clean the Base Tray, Fry Pan Basket, Fry Pan Basket Net, or removable components with a nonabrasive sponge, hot water, and mild detergent.

Note: Remove the Base Tray and Fry Pan Basket and place on a heatresistant surface to help cool the appliance quicker.

Note: If using the dishwasher for the Base Tray, Fry Pan Basket, and Fry Pan Basket Net, it is recommended to use top rack only.

Tip: If there is residual food in the Base Tray and Fry Pan Basket, add some hot water and let it soak separately for about 10 minutes for easier cleaning.

Afterward, use a soft cleaning brush to remove any lingering food.

Storage

  1. Unplug the appliance and let it cool down completely.
  2. Make sure that all the parts are clean and dry.
  3. Push the power cord into the storing capsule. Affix the cord by inserting it into the cord-affixing opening in the back of the unit.


Do not immerse unit in water or attempt to cycle through dishwasher. The outer surface may be cleaned by wiping carefully with a damp dishcloth or sponge. Make sure unit has cooled completely prior to cleaning.


In case of other problems, immediately unplug and contact Customer Service Department.
1-877-689-2838 • help@nuwavenow.com

TROUBLESHOOTING

PROBLEM: POSSIBLE CAUSE(S): RESOLUTION(S):
The NuWave Brio Healthy Digital 6-Qt. Air Fryer is not turning on or working.

The appliance is not plugged in.

Did not press "ON/ OFF" button.

Base Tray with Fry Pan Basket is not in the NuWave Brio Healthy Digital 6-Qt. Air Fryer.

Insert the plug into an appropriate grounded power socket. Press "ON/OFF" button after settings are selected. Place the Fry Pan Basket in the NuWave Brio Healthy Digital 6-Qt Air Fryer.
The ingredients fried in the Fry Pan Basket are not completely cooked.

Too many ingredients were used. The cooking temperature is too low.

The cooking time is too short.

Remove some ingredients from the Fry Pan Basket. Smaller batches are fried more evenly. Fry at a higher temperature. Set the NuWave Brio Healthy Digital 6-Qt. Air Fryer to fry for a longer time.
The food is fried unevenly. Certain types of ingredients need to be shaken halfway through the cooking time. Ingredients that are on the top need to be shaken halfway through the cooking time.
Fried snacks are not crispy when they come out of the NuWave Brio Healthy Digital 6-Qt. Air Fryer. You used a type of snack meant to be prepared in a traditional deep fryer. Use snacks designed to be baked in a traditional oven, or lightly brush some olive oil onto the snacks before placing in Brio for a crispier result.
Cannot slide the Fry Pan Basket into the appliance properly. The Fry Pan Basket is overfilled. The Fry Pan Basket is not placed in the Base Tray correctly. Do not fill the Fry Pan Basket more than 4/5. Push the Fry Pan Basket down into the Base Tray until you hear a click.
White smoke is coming out of the product. You are frying greasy foods. The Fry Pan Basket Net contains greasy residue from previous uses. When preparing greasy ingredients in the Air Fryer, large amounts of oil can smoke and infiltrate Fry Pan Basket. The oil will produce white smoke and the Fry Pan Basket might become hotter than usual. This will not affect the final cooking result. White smoke is caused by grease heating up in the Fry Pan Basket. Make sure you clean Fry Pan Basket properly after use.
French fries are fried unevenly in the NuWave Brio Healthy Digital 6-Qt. Air Fryer.

You did not soak the potato sticks properly before you fried them.

You did not use the right potato type or they were not fresh.

Soak potato sticks in a bowl of water for at least 30 minutes, take them out, and dry them with paper towels. Use fresh potatoes and make sure they stay firm during air-frying.
French fries are not crispy when they come out of the NuWave Brio Healthy Digital 6-Qt. Air Fryer. The crispiness of the fries depends on the amount of oil and water in the fries. Make sure you dry the potato sticks properly before you add the oil. Cut the potato sticks smaller and dry them for a crispier result. Add slightly more oil on potatoes before placing in Brio again for a crispier result.
If the unit needs to be replaced or returned to the manufacturer, please contact our Customer Service Department at: 1-877-689-2838 or help@nuwavenow.com.
Contact Customer Service if any of these errors occur:
Code E1 E2 E3
Error Sensor open ended Sensor short circuit Overheat

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download NuWave Brio 37001 - Healthy Digital Air Fryer 6-Qt Manual

Advertisement

Need help?

Need help?

Do you have a question about the Brio 37001 and is the answer not in the manual?

Questions and answers

Table of Contents