Siemens FIREFINDER-XLS Operation Manual page 33

CHAPTER 3 |
Control - Time / Date
Control - Disarm / Arm
Technical Manuals Online! - http://www.tech-man.com
Touch the Time/Date box to change the time and/or date. Use the keyboard screen to
select the correct digits as the cursor moves along. The time is set according to the
24-hour clock. To advance forward without changing a digit, press >. To go backward
without changing a digit, press<. When the time and date are correct, press the Done
soft key. Refer to Figure 3-3.
Enter Time/Date: 14:41:01 07/11/02
A B C D E
F G H I J
K L M N O
P Q R S T
U V W X Y
Z * # Bksp Clr
Cancel Done
Figure 3-3
Enter Time / Date Screen
Use Control Disarm/Arm to disarm or arm the operation of any of the following:
Device
Inputs (Components*)
Smoke/Photo
Thermal
Neural
Outputs (Components*)
Relay 1
Relay 2
*A trouble is reported for each disarmed component.
When a device or its input components are disarmed, they do not report events or
effect output logic. The output components are not controlled by output logic.
When a device or its output components are energized, they are activated and turned
on. When a device or its output components are de-energized, they are de-activated
and turned off.
Control-Disarm/Arm must not be used to silence alarm-sounding appliances.
firealarmresources.com
PMI OPERATION MANUAL
CAPS 0 1
2 3
4 5
6 7
8 9
Del
< >
Switch 1
Switch 2
LED
Status LED
MAINTENANCE MODE
3-3