Yamaha EF7200DE Owner's Manual page 20

y
i
o
p
p
5. Install the sleeve on the generator frame.
u
TIP
Refer to the illustration to be sure that the sleeve is
installed properly.
y Sleeve
000-000
u Generator frame
y
6. Install the bracket handle to the sleeve.
i Bracket handle
000-000
7. Install the locating damper on the sleeve.
o Locating damper
y
000-000
8. Place the handle on the carrier frame, and then
TIP
Lock the handle into position with the lock lever.
a
p Bolt (8 × 16 mm Flange bolt)
000-000
a Handle
000-000
9. Lift the engine 20 cm (7.87 in) off the ground using
fasten with the bolts.
Tightening torque:
16 N·m (1.6 kgf·m, 12 lb·ft)
a winch or other suitable lifting device.
– 15 –