Yamaha EF7200DE Owner's Manual page 19

0 q
9
8
9
e
t
t
3. Insert the bolt into the carrier frame, and then put
w
TIP
9 Make sure that the collar is placed into the washer.
9 Lock lever pin should be above stopper.
000-000
8 Nut (8 mm Flange nut [Self-locking nut])
9 Lock lever
0 Collar
q Washer (Plastic)
w Bolt (8 × 60 mm Flange bolt)
e Stopper
000-000
Tightening torque:
4. Place the carrier frame on the generator body so
TIP
Place the carrier frame 10 cm (3.94 in) from the end of
a
generator body.
r
a 10 cm (3.94 in)
Tightening torque:
t
r Bolt (8 × 45 mm Flange bolt)
000-000
t Plate
r
000-000
the washer, collar, and lock lever in this order, and
tighten the nut.
16 N·m (1.6 kgf·m, 12 lb·ft)
that the lock lever is positioned on the left side of
the control panel. Fasten the plate to the carrier
frame with the bolts.
16 N·m (1.6 kgf·m, 12 lb·ft)
– 14 –