Chapter 1 Installation
1.2.3
Restarting the System
1
1.2.4
Starting this Software
4
Restart the system when installation completes and a message asking you to restart the
system appears.
This software does not start automatically when the system is started. Select [Control
Panel] → [Device] → [TSBTNET] and then click the Start button. To enable this software
during system startup, click Startup in [Device], select Auto as the type of startup, and
then click the OK button.
Figure 1-4 Restarting Windows
Figure 1-5 Starting this
TC-net 100 PCI Bus Card Support Software User's Manual