Setting Up The Display; Mounting The Display - BenQ ST4302S User Manual

Setting up the display

Mounting the display

You can install the display on a vertical surface with a suitable wall mounting bracket or
on a horizontal surface with the optional desktop stands. Please pay attention to the
following notes during installation:
• This display should be installed by at least two adult persons. Attempting to install this
display by only one person may result in danger and injuries.
• Refer the installation to qualified technicians. Improper installation may cause the
display to fall or malfunction.
Installing the display on a wall
VESA Standard:
ST4302S: 200 x 200 (4 - M6 x 15L)
ST5502S: 400 x 400 (4 - M6 x 15L)
1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface.
Make sure that the size of the cloth is larger than the display.
2. Gently lay the display on the cloth with the LCD screen facing down.
3. Remove the desktop stands from the display if installed.
4. Identify the wall mounting screw holes on the back of the display as shown in the
illustration.
Setting up the display
ST4302S
ST5502S
11