Basic Operations; Turning The Display On Or Off; Switching Input Source - BenQ ST4302S User Manual

Basic operations

Turning the display on or off

1. Be sure to follow the instruction in
2. Before turning on the display, make sure the power switch is set to ON. The system
will enter standby mode.
The display's standby mode still consumes power. To completely cut off power supply, set the
Power switch to OFF and then disconnect the power cord from the power outlet.
• Only when the power switch is set to on, the power button on the rear panel and the power
button on the remote control will work.
• To turn on or off the display, press the power button on the rear panel or power button on
the remote control.
• Display in standby mode still consumes power. To completely cut off the power supply, remove
the power cord from the AC power outlet.

Switching input source

Press INPUT on the rear of the display or press
input source menu and then select an input source.
Power
Button
Connecting power on page
Power
Switch
on the remote control to open the
Basic operations
20.
21