Appendix A: The Afp-300/400; Database Conversion Utility - Notifier UniNet 2000 AFP-300 NION Instruction Manual

Plug-in

Hide thumbs

Table Of Contents

Table of Contents

For UniNet™ versions 2.1 SP2 or later, when upgrading an AFP-300/400 NION from the NION-232B architec-

ture to the AFP-300/400 NION architecture, the 400DBConvert utility must be run. IMPOR

station cannot be running during this conversion process. The conversion utility will alter existing

device IDs in the screen database to match the new format used by this NION

device IDs in the screen database to match the new format used by this NION. Any UniL

device IDs in the screen database to match the new format used by this NION

equations from the old system must be recreated after installing the new AFP

equations from the old system must be recreated after installing the new AFP-300/400 NION

equations from the old system must be recreated after installing the new AFP

The conversion process has three main steps:

1. To run the conversion utility, open up Windows™ Explorer, go to the c:\UniNet\PlugIns directory, then

double click on 400DBConvert.exe.

Technical Manuals Online! - http://www.tech-man.com