Echogear EGMF1 Instructions

FULL-MOTION
TV WALL MOUNT
For 26"-50"
(66-127 cm)
TVs
Model EGMF1
Tools:
Stud Awl or Pencil Level
Finder Thin Nail
7/32 in. 1/2 in.
Drill
(5.5 mm) (13 mm)
Wood
Step 1
Using the hex key , remove
07
the screws [S] and separate
the faceplate from the arm.
Keep screws for use in Step 6.
07
[S]
Does your TV weight more
than 60 lbs. (27 kg) including
accessories?
No — Perfect!
Yes — This mount is NOT compatible.
60 lbs.
(27 kg)
WARNING:
Exceeding the weight
capacity can result in serious personal injury
or damage to equipment! It is the installer's
responsibility to make sure the weight of the
TV (with accessories) does not exceed 60 lbs
(27 kg).
WARNING: This
Hardware
product contains small
items that could be
Wallplate and Arm
a choking hazard if
swallowed.
Before starting assembly,
verify all parts are
included and undamaged.
If any parts are missing or
damaged, do not return
x1
the damaged item to your 01
dealer; contact Customer
Service. Never use
damaged parts!
Step 2
Measure your TV hole pattern.
100 mm = 10 cm ≈ 4 in.
130 mm = 13 cm ≈ 5 1/8 in.
200 mm = 20 cm ≈ 7 7/8 in.
300 mm = 30 cm ≈ 11 3/4 in.
340 mm = 34 cm ≈ 13 3/4 in.
400 mm = 40 cm ≈ 15 3/4 in.
What is your wall made of?
Drywall with
wood studs?
Perfect!
?
Call Customer Service:
1-855-428-2490
Extender Brackets
Lag Bolts
5/16 x 2¾ in.
x2
02
03 x2
05 x2
Lag Bolt Washers
Extender
Screws 06 x2
Hex Key
04 x8 4 mm
07 x1
7 ⅞ in. 5 ⅛ in.
Step 3
(200 mm) (130 mm)
Determine which
TV bracket
configuration
(A or B) to use
based on your
A
TV hole pattern
measurements.
15 ¾ in.
(400 mm)
13 ⅜ in.
(340 mm)
11 ¾ in.
(300 mm)
11 ¾ in.
B
(300 mm)
Please read through these instructions completely to be sure you're comfortable with this
easy install process. Also check your TV owner's manual to see if there are any special
requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, contact Customer Service at 1-855-428-2490.
CAUTION:
Avoid potential personal injuries and property damage!
● This product is designed for use in wood stud walls - DO NOT install into drywall
alone
● The wall must be capable of supporting fi ve times the weight of the TV and mount
combined
● Do not use this product for any purpose not explicitly specifi ed by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly
or use
TV Screws
M4 x 35mm
M4 x 12mm
08 x4 13 x4
M6 x 35mm
M6 x 12mm
09 x4 12 x4
M8 x 20mm
M8 x 16mm
10 x4 11 x4
4 in.
(100 mm)
7 ⅞ in.
07 02
(200 mm)
5 ⅛ in.
(130 mm)
4 in.
(100 mm)
04
13 ⅜ in.
(340 mm)
03
15 ¾ in.
(400 mm)
If your TV hole pattern is greater than 200 mm x 200
mm (configuration B), attach TV bracket extenders
and to faceplate using extender screws
02
03
TV Washers
M4/M5
M6/M8
15 x4 16 x4
Spacers
17 x4
M8 x 35mm
x4
14
03
02
.
04