Echogear EGMF1 Getting Started

FULL-MOTION
TV WALL MOUNT
Model EGMF 1
Stud Awl or Pencil Level
Finder Thin Nail
7/32 in. 1/2 in.
Drill
(5.5 mm) (13 mm)
Wood
STEP 1
Using the hex key , remove
07
the screws [S] and separate
the faceplate from the arm.
Keep screws for use in Step 6.
07
[S]
Does your TV
weight more than 60 lbs. (27 kg) ?
No — Perfect!
Yes — This mount is NOT compatible.
60 lbs.
(27 kg)
WARNING:
can result in serious personal injury or damage
to equipment! It is the installer's responsibility
to make sure the weight of the TV (with
accessories) does not exceed 60 lbs (27 kg).
WARNING:
This product
Wallplate and Arm
contains small items that could be
a choking hazard if swallowed.
Before starting assembly,
verify all parts are included and
01 x1 x1
undamaged. If any parts are
missing or damaged, do not return
the damaged item to your dealer;
Extender Brackets
contact Customer Service.
Never use damaged parts!
NOTE: Not all parts and
hardware included will be used.
02 x2 x2
03 x2 x2
STEP 2
Measure your TV hole pattern.
H
W
mm
x
idth eight
W
H
100 mm = 10 cm ≈ 4 in.
130 mm = 13 cm ≈ 5 1/8 in.
200 mm = 20 cm ≈ 7 7/8 in.
300 mm = 30 cm ≈ 11 3/4 in.
340 mm = 34 cm ≈ 13 3/4 in.
400 mm = 40 cm ≈ 15 3/4 in.
What is your wall made of?
(including accessories)
Drywall with
wood studs?
Perfect!
Not Sure?
?
Exceeding the weight capacity
Call Customer Service:
1-855-428-2490
Lag Bolts
5/16 x 2¾ in.
05 x2 x2
Lag Bolt Washers
06 x2 x2
Extender
Hex Key
Screws
4 mm
07 x1 x1
04 x8 x8
STEP 3
Determine which
TV bracket
mm
configuration
to use
or
A B
based on your
TV hole pattern
measurements
from STEP 2.
B
Please read through these instructions completely to be sure you're comfortable with
this easy install process. Also check your TV owner's manual to see if there are any
special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, contact Customer Service at 1-855-428-2490.
CAUTION:
Avoid potential personal injuries and property damage!
● This product is designed for use in wood stud walls - DO NOT install into drywall alone
● The wall must be capable of supporting fi ve times the weight of the TV and mount combined
● Do not use this product for any purpose not explicitly specifi ed by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
TV Screws
M4 x 12mm
08 x4 x4
M8 x 25mm
11 x4 x4
M6 x 12mm
M4 x 35mm
09 x4 x4
12 x4 x4
M6 x 35mm
M8 x 16mm
13 x4 x4
10 x4 x4
7 ⅞ in. 5 ⅛ in. 4 in.
(200 mm) (130 mm) (100 mm)
A
7 ⅞ in.
(200 mm)
5 ⅛ in.
(130 mm)
4 in.
(100 mm)
15 ¾ in.
(400 mm)
13 ⅜ in.
(340 mm)
11 ¾ in.
(300 mm)
13 ⅜ in.
(340 mm)
11 ¾ in.
(300 mm)
15 ¾ in.
(400 mm)
If your TV hole pattern is greater than 200 mm x 200 mm
(configuration B), attach TV bracket extenders
03
Spacers
M8 x 35mm
TV Washers
14 x4 x4
2.5mm
18 x8 x8
22mm
16 x4 x4 17 x4 x4
19 x4 x4
M8 x 50mm
15 x4 x4
07 02
03
04
03
02
and
02
to faceplate using extender screws .
04