Related Manuals for Echogear EGCM1
Summary of Contents for Echogear EGCM1
- Page 1 #YourGearUpgraded Full Motion Corner TV Mount Model EGCM1 LANGUAGES Visit: echogear.com INSTRUCTION MANUAL...
- Page 2 Verify Your Wall Construction CAUTION: wood studs UUUUHHH ?!? DO NOT Unsure? install into drywall alone Contact The Echogear Pros Perfect! (See Back Page) Good to Go Grab Your Tools Toy Surprise Inside Every Box Hex Wrench Tape Pencil Phillips...
- Page 3 What’s in the Box ... what's in the boooox WARNING: DON'T FEED TO CHILDREN — This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
- Page 4 STUFF FOR STEP 2 Lag Screw 1/4 x 3 in. qty. 2 Washer Wall Plate/Arm (For Lag Screw) Drill Template qty. 1 qty. 2 1/4 in. qty. 1 Extension Brackets End Cap Extension End Cap Screws Screws Wall Plate Covers M5 x 8mm M6 x 6mm qty.
- Page 5 STEP 1 Attach the TV BRACKETs TO YOUR TV TV Screw Diameter TV Screw Length STEP 1.1 STEP 1.2 Only one screw size fits your TV. NO SPACER SPACER NEEDED Flat Back TV Flat Back TV Rounded or Irregular Back TV with Extra Space [TV brackets lay flat on...
- Page 6 Secure the TV Brackets to Your TV HIGH MOUNTING HOLES MOUNTING HOLES INSTALL UP/DOWN TV BRACKETS MUST BE LEVEL IF NEEDED...
- Page 7 No Spacer With Spacer Alternate Spacer setups...
- Page 8 STEP 2 I nstall the Wall Plate Determine Your Mount Location to Center Your TV in the Corner The stud CENTER must be located the MIN and MAX. at or between STUD STUD Standard Minimum Distance Maximum Distance STUD (Diagonal) from Corner from Corner TV Size...
- Page 9 Mark Drill Secure Wall Plate 3 in. (7.5 cm) 1/8 in. (3 mm) CAUTION: Avoid potential personal injury or property damage! Lag screws MUST BE firmly tightened to prevent unwanted movement of the wall plate/arm...
- Page 10 Attach Plate Covers Assemble Extensions...
- Page 11 Assemble End Caps Tighten Screws...
- Page 12 STEP 3 Hang Your TV Open the Safety Locks IMPORTANT: Save the screws for STEP 3.3...
- Page 13 Hang Your TV HEAVY! You may need assistance with this step. IMPORTANT: TV brackets MUST be centered span the faceplate of arm...
- Page 14 Secure Your TV Level and Lock CAUTION: Avoid potential personal injury or property damage! Bracket clips and screws MUST be installed to the secure the TV in place. DO NOT OVERTIGHTEN.
- Page 15 Adjustments Tilt Your TV should adjust easily when moved, then stay in place. If your TV is too loose or too tight, adjust tilt lever NOTE: Once your TV is in place, tighten the tilt lever to prevent unwanted movement. TO ADJUST THE TILT TENSION, first rotate (tighten or loosen) the tilt lever as far as you can, then:...
- Page 16 Level REMOVE YOUR TV HEAVY! You may need assistance with this step. Righty Lefty Level Loosey Tighty...