Siemens SITRANS LC500 Operating Instructions Manual page 78

Menu Affected
Item by:
15 17
First select the solid-state switch output at menu 17 (contact open or contact closed).
1. Set the rotary switch to 5.
2. Press the RED (+) or BLUE (–) button to increase or decrease the value.
or: Press and hold a button for a prolonged time start a repeat function.
Lower Threshold Setting: (solid-state output)
The Lower Threshold Setting is the % of range below which the probe is considered
uncovered. In order to switch the output signal, the corresponding delay time has to be
met (Menu 14).
If the solid-state switch control (Menu 17) is disabled, menu 16 displays - - - -. When the
solid-state switch control is enabled, menu 16 displays the Lower Threshold Setting in
percent. As an extra identifier, a downward ramp
Menu Affected
Item by:
16 17
First select the solid-state switch output at menu 17 (contact open or contact closed).
1. Set the rotary switch to 6.
2. Press the RED (+) or BLUE (–) button to increase or decrease the value.
or: Press and hold a button to start a repeat function.
Page 70 SITRANS LC500 – OPERATING INSTRUCTIONS
Rotary
Left
Switch Mode
Arrow
Position
Solid-state
switch con-
trol enabled
5 On
Solid-state
switch con-
trol disabled
Rotary
Left
Switch Mode
Arrow
Position
Solid-state
switch con-
trol enabled
6 On
Solid-state
switch con-
trol disabled
Des-
Identifier
cription
Upward Upper
ramp at right Threshold
of value Setting
*
is displayed to the right of the value.
Added Des-
indicator cription
Downward Lower
ramp at right Threshold
of value Setting
*
7ML19985GE04
Values
% of
range
Display
shows
- - - -
Values
% of
range
Display
shows
- - - -