拆卸接线盒 Junction Box Dismounting - Midea J82 Series Installation And Service Manual

6.6 拆卸接线盒 Junction Box Dismounting
工具：十字螺丝刀，剪刀
Tool: Cross screwdriver , Cutting knife
步骤1：拆除一个接地螺钉
Step 1: As shown in left picture below, remove a grounding screw near the junction box.
步骤2: 如上图右所示，延箭头方向抬起卡槽处电源线，同时向箭头方向拉出电源线。
Step2: As shown in right picture above, in the direction of the arrow, lift the power cord at the slot and pull
out the power cord in the direction of the arrow.
步骤3：如上图左所示，用剪刀剪断固定线束的扎带
Step3: As shown in left picture above, cut the tie of the fixed harness
步骤4：如上图右所示，拔掉PCB板上的3个线束端子（方式如6.5步骤2）和电容。
Step4: As shown in right picture above, unpin the three harness terminals on the PCB (in the form of 6.5 Step
2) and the capacitor.
- -
10