Step 5 (Optional): Connect To An Rx30 Managed Accessory; Step 6: Attach The Antennas; Step 7: Mount The Router - Cradlepoint R1900 Series Installation Manual

Hide thumbs Also See for R1900 Series:

Table of Contents

STEP 5 (OPTIONAL): Connect to an RX30 managed accessory.

For PoE devices, attach the R1900 to the RX30-POE managed accessory. Refer to the installation

instructions detailed in the RX30 Quick Start Guide and then continue to the next step when the RX30 is

appropriately attached.

The R1900 series router does not include antennas. Antennas must be purchased separately or through a

third-party vendor. Refer to the

Cradlepoint Antenna

webpage for more information and options.

NOTE: Only use remote or cabled-out (x-in-1) antennas. Paddle antennas are not recommended for

optimal performance.

Refer to the

Vehicle Installation Guide for Mobile Routers

for antenna setup best practices.

The R1900 series router may be mounted in a number of ways and should be completed by a

professional installer. Refer to the following for best practices:

• Mark the desired mounting location on the ceiling, wall, kiosk, or vehicle using a pen or marker.

Table of Contents

Show Quick Links

Table of Contents