To Remove Cover - Cook's Companion Uni~Versa Jr. Pan Getting Started

TO REMOVE COVER:

STEP 1:
PLACE PAN ON A FLAT SURFACE
WITH THE HANDLE POINTED
TOWARD THE RIGHT.
STEP 2:
OPEN THE UPPER COVER COMPLETELY,
COVER WILL STOP WHEN OPEN AT 90º
TO THE LOWER BASE PAN.
STEP 3:
GENTLY SLIDE THE COVER TOWARD YOU. THIS ACTION WILL DISCONNECT THE COVER
FROM THE LOWER BASE. THE LEAD HINGE PIN MUST BE OUT OF THE RECEIVING HOLE
TO REMOVE. SEPARATING BEFORE COMPLETELY OUT OF THE RECEIVING HOLE MAY
CAUSE DAMAGE TO THE HINGE PIN AND VOID THE WARRANTY.
TO ASSEMBLE COVER:
STEP 1:
PLACE PAN ON A FLAT SURFACE
WITH THE HANDLE POINTED
TOWARD THE RIGHT.
STEP 2:
WITH THE COVER AT 90º TO THE BASE PAN,
ALIGN THE ROUND HINGE PINS WITH THE
RECEIVING HOLES ON THE BASE PAN.
GENTLY SLIDE COVER INTO PLACE.
NOTE: THE LEAD HINGE PIN AND RECEIVING HOLE FIT LIKE A LOCK AND KEY.
ENSURE PIN AND HOLE ARE ALIGNED BEFORE INSERTING.
STEP 3:
MAKE SURE THE HINGE PINS ARE INSERTED COMPLETELY AND GENTLY CLOSE THE COVER.
FAILURE TO INSERT THE HINGE PIN COMPLETELY MAY DAMAGE THE HINGE AND VOID THE
WARRANTY.
WARNING:
Never attempt to remove or assemble the cover while the pan is hot.