Using Your Beverage Cooler; Display; Standby Mode; Light Key - Insignia NS-BC48SS7 User Manual

Using your beverage cooler

Standby key

Display

When you plug in your beverage cooler for the first time, the display screen turns on for
three seconds, then the start-up tone rings.
CAUTIONS:
• The control keys should be pressed gently.
• Avoid scratching the control panel with sharp objects.
• Keep magnets away from the control panel. Otherwise your cooler does
not set and operate normally.

Standby mode

To enter standby mode, press the Standby key continuously for three seconds. The
buzzer sounds and the display turns off.
To return to normal mode, press the Standby key.

Light key

Press the Light key to turn on or turn off the light. The buzzer sounds when the light is
turned on or off.

Setting the temperature

Press the Temperature up (
temperature by one degree.
The temperature range is 34° ~ 50° F (1° ~ 10° C).

Switching the temperature setting between Fahrenheit and Celsius

Press and hold the Temperature up (
three seconds to switch between Fahrenheit and Celsius.

Memory function

When your cooler is turned off, it remembers the currently set temperature and returns to
that setting when it's turned back on.
8
Light key Display
) or down ( ) buttons, to increase or decrease the
) and down (
www.insigniaproducts.com
Temperature
Temperature
up key
down key
) buttons at the same time for