Leveling Your Beverage Cooler; Providing Correct Ventilation; Providing A Correct Power Supply - Insignia NS-BC48SS7 User Manual

Leveling your beverage cooler

• Your beverage cooler must be level in order to function correctly. If your beverage
cooler is not leveled during installation, the door may not close or seal correctly,
causing cooling, frost, or moisture problems.
• To level your beverage cooler, you may either turn the leveling foot clockwise to raise
that side to your beverage cooler or turn it counter-clockwise to lower that side.

Providing correct ventilation

• Place your beverage cooler at least 1.6 inches (4 cm) from the wall to ensure correct
airflow to the compressor.
• Do not place your beverage cooler near any heat sources, such as a heater or stove, as
this may put a strain on the compressor.

Providing a correct power supply

Check your local power source. Your beverage cooler requires a 110 V-120 V, 60 Hz power
supply.
Use a receptacle that accepts the grounding prong. The power cord is equipped with a
3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet
to minimize the possibility of electric shock hazard from your beverage cooler.
Using a 3-prong plug and outlet
3-prong plug
Notes:
• Your beverage cooler should always be plugged into its own individual
electrical outlet which has a voltage rating that matches the rating plate.
• Never unplug your beverage cooler by pulling on the power cord. Always
grip the plug firmly and pull straight out from the outlet.
3-prong receptacle
Receptacle box cover
www.insigniaproducts.com
Using a grounding adapter
Grounding lead
Grounding adapter Receptacle box cover
48-Can Beverage Cooler
Screw
Receptacle
7