Insignia NS-MB8000B-C Quick Start Manual

PACKAGE CONTENTS

• Mobile Battery Pack
• Micro-USB Charging Cable
• Quick Setup Guide

CHARGING THE MOBILE BATTERY

Fully charge your mobile battery pack before using it for the first
time.
1 Plug the small end of the included USB cable into the battery
pack's Micro-USB port (input).
2 Plug the large end of the USB cable into a standard USB port
on your computer, vehicle charger, or wall charger (not
included).
The battery pack automatically begins charging.
Before using your new product,
please read these instructions to prevent any damage.
Micro-USB (input)
Battery Indicator Button
LEDs
Quick Setup Guide

CHARGING YOUR ELECTRONIC DEVICE

USB (output)
1 Plug the large end of a USB cable into one of the battery
pack's USB ports (output).
The right USB port provides a higher output (5V-2A) than the
left USB port (5V-1A). Check your device's input
requirements to decide which USB port to use.
2 Plug the small end of the USB cable into your device. The
battery pack charges your device. Recharge the battery pack
when the LED starts blinking.
Note:
•
You can use both outputs to charge two devices at the
same time.
• If your device requires a different
provided, use the cable that came with your device.
|
NS-MB8000B-C
Mobile Battery Pack
connector than the one