Index Composition Product description Indications for use Features Safety information Symbols Operating conditions Power supply specifications Environment operating conditions Regulatory compliance Product Compatibility and Incubation programs Bionova MiniPro Incubation Programs ® Bionova MiniPro Auto-reader compatible indicators ® Instructions for use Start-up Interpretation of results of PRO1 indicators Disposal Reprinting of results Remaining incubation time...
Composition Product description Bionova MiniPro Auto-reader has been designed for the ® automatic readout of Terragene Chemdye Hygiene Monitoring ® ® System PRO1 Indicators (PRO1 Protein Pen Indicators) appropriate for surface cleaning and contamination control applications. Do not place a new Protein Pen until the Temperature is stable Bionova MiniPro Auto-reader incubates at 60 °C and performs...
Page 5
Important Control Panel Direct current Cavity for Paper For indoor use only Thermal Printer Keep away from sunlight Temperature Stability Indicator Batch code Attention Indicator Light Manufacturer Incubation Position Separate collection for waste of electrical and electronic equipment Start Incubation Program Button / Time Left Red LED Indicator / Protein level above Threshold (HTM01- 01 Threshold mode) / Protein level above 1ug (ISO 15883-5 To avoid risks and/or damaging the device:...
Do not use this product in a manner not specified by Do not place the Auto-reader near devices that emit strong Terragene S.A., otherwise the protection provided by the electromagnetic fields. product might be affected.
Page 7
Set-up mode section. We develop new Indicators for extending the features of our Auto-readers regularly. Please check out your Auto-reader’s 4|Select your preferred Protein Quantification Threshold www.terragene.com/minipro compatibility matrix on to find Mode for your Auto-reader between the two Threshold out all compatible indicators for your device.
Page 8
Instructions for use For selecting a Threshold mode and a Threshold value, please An incubation position can not be enabled before the incubation follow the indications detailed on Threshold Mode selection on temperature is stable and the Auto-test has been carried out Bionova Cloud Environment section.
Page 9
Instructions for use results of PRO1 indicators section for more information. After a Readout result is informed remove the indicator from the incubation position an press the button once to reset the incubation position to its stand-by state. Note: The color of the solution on the PRO1 indicator can Activate be used for a qualitative reading only if the protein pen is removed when the program ends.
Page 10
Readout results for HTM01-01 Threshold Mode Instructions for use HTM01-01 Threshold Mode default Protein Quantification Threshold mode of your Auto-reader. HTM01-01 guidelines indicates the use of a single protein quantity threshold to evaluate cleaning efficacy. The guidelines *Reference recommends that the residual protein level upper limit of volume acceptable protein contamination after processing is 5 µg BSA Readout cone without swab equivalent per instrument side, indicating as well that lower levels may be recommended for particular applications.
Page 11
Instructions for use 1 µg Take action immediately whenever a POSITIVE Readout 2 µg Result is informed as this indicate that the protein quantity 3 µg found does not comply with the user defined quality standards 4 µg set for the cleaning process. 5 µg Readout results for ISO 15883-5 Threshold Mode Approximate amounts of BSA expressed in µg.
(order code ICTP). Instructions for use regulations. It is not possible to use or incubate a PRO1 indicator Paper width : 57 mm more than once. Please refer to the PRO1 instructions for use. Maximum paper thickness: 60 g/m Reprinting of results Maximum diameter size: 23 mm The Auto-reader allows reprinting of the last 3 results.
Auto-reader. The update process the power source. only lasts a few seconds and is carried out without the loss of any Auto-reader’s data. Please visit www.terragene.com/ Note: The green light indicator corresponding to incubation software to download Bionova Bioupdate.
Page 14
Threshold Mode selection for PRO1 Indicators The new Bionova Cloud environment is a Cloud based solution ® that integrates the information generated by Terragene ® Bionova Cloud Environment allows the selection of the ® electronic devices with an easy-to-use Web App for the Protein Quantification Threshold Mode and Threshold values traceability of sterilization and disinfection control applications.
Page 15
Bionova Cloud Surface Eye Mobile App was designed. ® The Surface Eye Mobile App is a new proprietary application developed by Terragene compatible with Android OS that ® allows the user to obtain an estimation of an instrument’s swabbed...
Page 16
Bionova® Cloud Environment It is a good practice to standardize the swabbing area for each instrument. Defining and using the same swabbing area for a given instrument allows the sampling process to be repeatable through time and deliver valuable statistical information.
Bionova® Cloud Surface Eye appropriate. This cleaning procedure must be followed every time a spill Mobile App advanced features occurs on any of the external surfaces of the Auto-reader. If further cleaning is required, or if you have doubts about Redefining the swabbing area of an instrument the cleaning agents you may use, please contact your local distributor.
Troubleshooting Fault Possible cause Action The Auto-reader does not start. Power supply is not connected. Check that the power supply is connected to a proper mains. Check that the DC plug of the power supply is connected to the rear of the Auto-reader. The Auto-reader informs an error A indicator is placed in the incubation Check that every incubation position is...
-5 (five) years from its manufacture-. Limitation of liability Terragene S.A. shall not be held liable for any loss or damage that result from the unsuitable use of the equipment, negligence or user’s full responsibility.
Need help?
Do you have a question about the Bionova MiniPro and is the answer not in the manual?
Questions and answers