Page 1
UVFlow Operating, Maintenance & User Guide Rev. 0 | August 2021...
Page 2
None of the parts of this operating, maintenance and user guide may be photocopied or copied without the prior written notice by Terragene ® The information contained in this document has only informational purposes and is subjected to changes without previous notice.
Page 3
Electrical Connections On, Off, and Automatic mode UVFlow with push-button or manual mode UVFlow with remote control via connection to your internal network or remote mode Connecting the UVFlow to your local Wi-Fi internet network Maintenance and repair Instructions for changing the germicidal tube...
UVFlow. The UVFlow disinfection system is designed to be used as part of a cleaning and disinfection program to eliminate pathogens that may be present in the air of the room where it is placed.
•DO NOT look directly over the fans. special attention for the protection and safety of both personnel and equipment: The UVFLow is an electrical unit measured by UVC radiometer LINYANG LS125-UVCWP-X1-PROBE which ensures that this unit is safe and fulfills its purpose of protecting people.
This unit is set to work in "on" mode while there are people inside the room where it is placed, as the UVC lamps are The UVFlow can be used in the presence of people. It is suitable for use in any space where you want to protect enclosed inside the unit.
Page 7
Please send a message to info@terragene.com to find out if a more current version of the operating software is available. The UVFlow has two different ways to turn it on: (This is an example) Password: •By pushing a button or manual mode.
Connecting the UVFlow to your Note: for step 3, you must still be connected to the network of the Flow unit, for example: local Wi-Fi internet network NETWORK connected: FLOW-XX-XX-XX-XX-XX-XX IP in browser: 192.168.100.50 This option is to use the equipment without disconnecting Controller tab: "Setup".
Transport Guidelines Steps: 1|Ensure that the UVFlow equipment is switched off and with the power cord disconnected from the mains. 2|Place the equipment on a horizontal surface with the curved Handling and Lifting the UVFlow front (with the Terragene logo) facing upwards.
Terragene is not responsible for any personal injury, damage, ® •All repair and service work is performed by Terragene ® or delay caused by failure to follow the installation, operation, authorized personnel.
Page 13
UVFlow Manual de Operaciones, Mantenimiento y Uso Rev. 0 | Agosto 2021...
Ninguna parte de este manual de operaciones, mantenimiento y uso se podrá fotocopiar o reproducir sin el consentimiento previo y por escrito de Terragene ® La información contenida en este documento es sólo para fines informativos y está sujeta a cambios sin previo aviso.
Page 15
Encendido, apagado y modo automático UVFlow con pulsador o modo manual UVFlow con control a distancia por medio de conexión a su red interna o modo remoto Conectar el UVFlow a su red de internet local Wi-Fi Mantenimiento y reparación...
útil prolongada para su UVFlow. El sistema de desinfección UVFlow se ha diseñado para usarse como parte de un programa de limpieza y desinfección para eliminar los patógenos que pueden estar presentes en el aire de la habitación dónde se coloca.
•NO mirar directamente sobre los ventiladores. utilización del producto y cambios de componentes ante necesidad de cambios. El UVFLow es una unidad eléctrica medida por radiómetro UVC LINYANG LS125-UVCWP-X1-PROBE que garantiza En este manual se utilizan los siguientes tipos de mensaje...
La exposición de forma irresponsable a las lámparas de luz mientras están encendidos. ultravioleta tipo c, que integran los productos de Terragene ® puede tener algunos efectos tales como: •La exposición indiscriminada a los rayos puede aumentar el...
Page 19
UVFlow con control a distancia por medio de conexión a su red interna o modo remoto El UVFlow puede ser utilizado en presencia de personas. Puede ser colocado en cualquier espacio donde se quiera proteger a la salud de las personas.
Page 20
Observación: el paso 3, aún debe estar conectado a la red del Conectar el UVFlow a su red de equipo flow, es decir: RED conectado: FLOW-XX-XX-XX-XX internet local Wi-Fi IP en navegador: 192.168.100.50...
Mantenimiento y reparación Pasos: 1|Asegúrese de que el equipo UVFlow se encuentre apagado y con el cable de alimentación desconectado de la red eléctrica. 2|Coloque el equipo sobre una superficie horizontal con el Abstenerse de realizar reparaciones o ajustes en los equipos,...
Si tiene preguntas acerca de los posibles servicios de aplicará al equipo en la cual se hayan efectuado reparaciones o tratamiento de almacenamiento a largo plazo, comuníquese alteraciones, salvo que haya sido con la autorización de Terragene ® con su representante de ventas de Terragene local.
Need help?
Do you have a question about the UVFlow and is the answer not in the manual?
Questions and answers