Table of Contents
Advertisement
REAR CAMERA
(3/3)
2
5
6
3
4
Adjustment of the display
Accessing the brightness modes
Press button 6 repeatedly to select one
of the four preset brightness modes:
– "day" mode;
– "intermediary" mode;
– "night" mode;
– "black screen" mode: allows suspen-
sion of the display. Screen 2 displays
a black image accompanied by the
"OFF" message. To exit this mode,
press button 6 again to access the
first brightness mode ("day" mode).
2.24
Adjustment of brightness modes
Once the mode has been selected,
press button 5as many times as re-
quired to access the type of setting you
wish to change:
– brightness;
– contrast;
B
– colour;
– RESET: resets factory settings.
Press buttons 3 (+) or 4 (-) to adjust the
setting.
Note: only the first three modes ("day",
"intermediary" and "night") can be set.
Each time the vehicle is started,
the function returns to the settings
saved at the last engine stop.
Operating faults
When the system detects an operating
fault, warning light B appears temporar-
ily on screen 2.
This may be caused a temporary fault
affecting the camera or screen (clear-
ness, fixed image, delayed communi-
cation, etc.).
If the warning light remains on, consult
an approved dealer.
Advertisement
Chapters
Table of Contents
