Husqvarna R112iC Operator's Manual page 25

Problem
Warning indicator flashes fast
and all other LED lights are OFF.
The warning indicator on the dis-
play flashes red + first battery
LED light.
The product cannot be started.
The display does not come on
when the power switch is set to
"1".
All LED lights on the display are
flashing slow in sync.
All LED lights on the display has
a solid light for more than 3 sec-
onds.
1263 - 005 - 03.02.2022
Cause
Traction motor control unit is
overheated.
Empty battery.
The switches for the parking
brake and the seat are not en-
gaged. The cutting deck is not in
transport position or is engaged.
The forward/rearward pedal is
pushed.
The battery charger is connected
to the product.
The display is broken.
The power switch is defective.
The vehicle control unit (VCU) or
its connections is defective.
The battery is not charged.
Blown 5 A fuse.
The vehicle control unit (VCU) or
its connections are defective.
The power switch is defective.
The control panel is broken.
The vehicle control unit (VCU) or
its connections are defective.
Defective internal connection be-
tween the control units in the
product.
Action
Turn OFF the product and wait for the motor
control unit to become cool.
Charge the battery.
To start the product on page 19 .
Refer to
Release the pedals.
Disconnect the battery charger before you
start the product.
Speak to an approved service workshop.
Charge the battery.
Change the fuse.
Speak to an approved service workshop.
Speak to an approved service workshop.
Speak to an approved service workshop.
25