Brc301B61 Controller - Daikin VAM-J8 Installation And Operation Manual

13 Configuration
Vent
To change the ventilation mode
1 Press the Menu/Enter button to display the main menu.
2 Press the Up/Down buttons to select Ventilation and press the
Menu/Enter button.
Main Menu 1/2
Airflow Direction
Individual Air Direction
Quick Start
Ventilation
Energy Saving Options
Schedule
Return Setting
3 Press the Up/Down buttons to select Ventilation Mode and
press the Menu/Enter button.
Ventilation 2/2
Ventilation Rate
Ventilation Mode
Return Setting
4 Press the Up/Down buttons to select the required ventilation
mode. For more information about ventilation modes, see
Ventilation modes in the installer and user reference guide.
Ventilation 2/2
Ventilation mode
Bypass
Return Setting
Ventilation modes
You can change the ventilation mode in the main menu.
Mode Description
Auto mode Using information from the air
conditioner (cooling, heating, fan,
and set temperature) and heat
reclaim ventilation unit (indoor and
outdoor temperatures), this mode
automatically switches between
Heat Reclaim Ventilation mode and
Bypass mode.
Heat Reclaim Ventilation Outdoor air is supplied to the room
mode (Energy Reclaim after passing through a heat
Ventilation) exchange element, where heat is
exchanged with the room air.
Bypass mode The outdoor air bypasses the heat
exchange element. This means that
outdoor air is supplied to the room
without heat exchange with the room
air.
Time to clean filter indication
When the filter pressure drop becomes too large, the following
message or icon is displayed at the bottom of the basic screen: Time
to clean filter or . Clean the filters. For more information, see
service" [ 4 6].
"5 Maintenance and
Cool
Set to
28
°C
Time to clean filter
Installation and operation manual
24
Bypass Energy Reclain Vent. Auto
To remove the Time to clean filter indication
1 Press the Menu/Enter button.
2 Press the Up/Down buttons to select Reset Filter Indicator.
3 Press the Menu/Enter button.
Result: You return to the basic screen. The Time to clean filter
indication is no longer displayed.
Main Menu 1/3
Reset Filter Indicator
Airflow Direction
Individual Air Direction
Quick Start
Ventilation
Energy Saving Options
Return Setting
Cool
Set to
28
°C
About error indications
If an error occurs, there is an error icon in the basic screen and the
operation lamp blinks. If a warning occurs, ONLY the error icon
blinks and the operation lamp does NOT. Press the Menu/Enter
button to display the error code or warning and contact information.
Cool
Set to
28
°C
Error : Push Menu Button
The error code blinks and the contact address and model name
appear as shown below. In this case, notify your dealer about the
error code.
Error Code:A1
Contact Info
0123 – 4567 – 8900
––– /000
Indoor Model
Outdoor Model ––– /000
Return
13.4.2

BRC301B61 controller

NOTICE
This controller is NOT allowed in combination with EKVDX
indoor units.
For non-independent systems, starting, stopping and setting a timer
is NOT possible with this controller (BRC301B61). In such cases,
use the air conditioner controller (BRC1E53) or the central controller.
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664011-1 – 2021.08