Humidity Controlled Crisper; Removing Humidity Controlled Crisper; Glide'n'serve - Kenmore 795.7102 Series Use & Care Manual

HUMIDITY CONTROLLED CRISPER

The crispers provide fresher-tasting fruit and vegetables
by letting you easily control humidity inside the drawer.
You can control the amount of humidity in
the moisture-sealed crispers by adjusting the control
to any setting between VEGETABLE and FRUIT.
• VEGETABLE keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
• FRUIT lets moist air out of the crisper for best storage of
fruits.

REMOVING HUMIDITY CONTROLLED CRISPER

1. To remove, pull the drawer out to full extension.
2. Lift the front of the crisper up, then pull it straight out.
3. To install, slightly tilt up the front and insert the drawer
into the frame and push it back into place.
To remove the glass
1. Lift up the glass under the crisper cover.
2. Pull the glass up and out.
All manuals and user guides at all-guides.com
USING YOUR REFRIGERATOR
HUMIDITY SETTING
VEGETABLE FRUIT

GLIDE'N'SERVE

The Glide'N'Serve provides storage space with a variable
temperature control that keeps the compartment colder
than the refrigerator temperature. This drawer can be
used for large party trays, deli items, or beverages.
NOTE: It is not recommended that this drawer be used for
fruits and vegetables.
COLD
Glide'N'Serve Control
The control regulates the air temperature in the drawer.
Set control level to COLD to provide normal refrigerator
temperature. Use the COLDER setting for meats or other
deli items.
NOTE: Cold air directed to the Glide'N'Serve can
decrease refrigerator temperature. It may be necessary to
adjust the refrigerator temperature.
To remove and replace Glide'N'Serve
1. To remove, pull the drawer out to full extension.
2. Lift the front of the drawer up, then pull it straight out.
3. To install, slightly tilt up the front and insert the drawer
into the frame and push it back into place.
21
TEMP. CONTROL
COLDER
1