Humidity Controlled Crisper; Removing Humidity Controlled Crisper; Glide'n'serve - Kenmore 795.7160 Series Use & Care Manual

HUMIDITY CONTROLLED CRISPER
The crispers provide fresher-tasting fruit and
vegetables by letting you easily control humidity
inside the drawer.
You can control the amount of humidity in the
moisture-sealed crispers by adjusting the control to
any setting between VEGETABLE and FRUIT.
• VEGETABLE keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
• FRUIT lets moist air out of the crisper for best
storage of fruits.
GLIDE'N'SERVE
The Glide'N'Serve provides storage space with a
variable temperature control that keeps the
compartment colder than the refrigerator
temperature.
This drawer can be used for large party trays, deli
items, or beverages.
Note: It is not recommended that this drawer be
used for fruits and vegetables.
COLDn • ® ® TEMP CONTROLn e • ® COLDERn
REMOVING HUMIDITY CONTROLLED CRISPER
1. To remove, pull the drawer out to full extension.
2. Lift the front of the crisper up, then pull it straight
out.
3. To install, slightly tilt up the front and insert the
drawer into the frame and push it back into place.
Glide 'N' Serve Control
The control regulates the air temperature in the
drawer. Set control level to COLD to provide normal
refrigerator temperature. Use the COLDER setting
for meats or other deli items.
NOTE: Cold air directed to the Glide'N'Serve can
decrease refrigerator temperature. It may be
necessary to adjust the refrigerator temperature.
To remove the glass
1. Lift up the glass under the crisper cover.
2. Pull the glass up and out.
To remove and replace Glide'N'Serve
1. To remove, pull the drawer out to full extension.
2. Lift the front of the drawer up, then pull it straight
out.
3. To install, slightly tilt up the front and insert the
drawer into the frame and push it back into place.
22