Kenmore 795.7102 Series Use & Care Manual page 14

HOW TO REMOVE AND INSTALL THE
FREEZER DRAWER
2. Installing Freezer Drawer
• Fully extend the rails by grasping the center bar with
both hands and pulling straight out.
• Hook the door support (1) into the rail tabs (2) on both
sides.
• Lower door into final position and tighten the screws (3).
3
All manuals and user guides at all-guides.com
REFRIGERATOR INSTALLATION
1
2
14
• Make sure you have the correct rail cover for each side.
Left
Rail Cover
• Align the tabs on the covers with the assembly holes on
each rail, and snap the rail covers in place to secure.
• With the drawer pulled out to full extension, insert the
lower basket (4) in the rail assembly.
w w WARNING: If the Durabase divider is removed, there is
enough open space for children or pets to crawl inside.
To prevent accidental child and pet entrapment or
suffocation risk, DO NOT allow them to touch or go
near the freezer drawer.
w w WARNING: DO NOT step or sit down on freezer
drawer.
Right
Rail Cover
Assembly Hole
4