Connect The Water Supply - Kohler K-5724K Installation Manual

3. Connect the Water Supply

CAUTION:
between the seat and the water supply stop. This will prevent water leakage.
NOTICE:
Use care to avoid cross threading or overtightening the connections. Unless other-
wise indicated, use an adjustable wrench to tighten one-quarter turn past hand-tight.
Connect the T-valve to the seat hose.
If needed, connect the supply hose to the supply stop.
Connect the supply hose to the T-valve.
Confirm the filter is in place. Install if needed.
Install the seat hose to the orange colored inlet.
IMPORTANT!
The white cap must be in place on the side opposite the seat hose.
Connect the T-valve to the water inlet on the toilet tank.
Turn on the water supply.
Check all connections for leaks and make any adjustments as needed.
Filter
T-Valve
Supply Stop
1456686-X2-A
Risk of property damage. Do not push or pull on the water connection
Filter
Or
Hose
Supply Hose
3 Kohler Co.