104°F (40°C). Observe all local plumbing, electrical, and building codes. Only connect the seat to a cold water supply of drinking quality at a pressure of 20 (139 kPa) - 80 psi (551 kPa). 1456686-X2-A Kohler Co.
Reposition the mounting plate as needed. Install the Seat Securely tighten the mounting plate bolts and nuts. Slide the seat onto the mounting plate until you feel it snap into plate. Mounting Plate Release Button Kohler Co. 1456686-X2-A...
The white cap must be in place on the side opposite the seat hose. Connect the T-valve to the water inlet on the toilet tank. Turn on the water supply. Check all connections for leaks and make any adjustments as needed. Filter Filter T-Valve Supply Stop Hose Supply Hose 1456686-X2-A Kohler Co.
Care and Cleaning For best results, keep the following in mind when caring for your KOHLER product: • Always test your cleaning solution on an inconspicuous area before applying to the entire sur- face. Avoid using aerosol products. • Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and dry any overspray that lands on nearby surfaces.
Firmly grip the wand, then pull the nozzle and remove. Select the replacement nozzle. With the outlet holes facing up, grasp the wand and firmly push the replacement nozzle into place. Nozzle 1 Nozzle 2 Nozzle 3 1456686-X2-A Kohler Co.