Connect The Water Supply - Kohler C3-420 Installation Instructions Manual

8. Connect the Water Supply

Gasket
T-Valve
Supply Hose
Supply Stop
CAUTION: Risk of property or product damage. Pushing or pulling on the
water connection may cause water leakage.
NOTICE: Use care to avoid cross-threading or overtightening the connections. Use
an adjustable wrench to tighten one-quarter turn past hand-tight.
Connect the T-valve to the water line.
If needed, connect the supply hose to the supply stop.
Connect the supply hose to the T-valve.
Verify that the gasket is installed inside the T-valve.
Connect the T-valve to the water inlet on the toilet tank.
Turn ON the water supply.
Check all connections for leaks, and make adjustments as needed.
1354689-2-D
Water Line
12 Kohler Co.