Table of Contents
Advertisement
https://appliancetechmanuals.com
K. Removal and Replacement of Door Gasket
Remove old gasket by pulling it directly out of the vinyl gasket retainer. Thoroughly clean
the gasket area with mild soap and water prior to installing the new gasket. The new
gasket should be installed by assembling it at the corners first, then working toward the
center at the top, bottom, and sides. The arrow-shaped portion of the gasket should be
firmly seated in the retainer groove for proper assembly. This can be checked by lifting
the edge of the gasket and observing the engagement.
In order to get a proper gasket fit, it is important not to stretch gasket material
during assembly.
L. Door Re-Hinging
The doors are reversible. See the table below. Instructions for re-hinging are included in
the kits.
VI. Cleaning Instructions
1. Stainless Steel Exterior
Wipe the exterior occasionally with a clean, soft cloth. Use a damp cloth containing a
neutral cleaner to wipe off oil or dirt build up.
2. Interior
Spills should be wiped up promptly to avoid unpleasant odors. The cabinet interior
should be cleaned periodically with a mild soap or detergent.
3. Door Gaskets
Door gaskets should be cleaned regularly with mild soap and water to remove dirt and
grease.
4. Air Filter
Check the filter at least once a month. If it is dirty, use warm water and a neutral
cleaner to wash the filter.
5. Condenser
Check the condenser once a year and use a brush or vacuum cleaner to clean the unit
as required.
CAUTION
Convert
Door Type
Right to Left
Full
Left to Right
Full
Right to Left
Half
Left to Right
Half
46
Kit Number
HS-4016
HS-4017
HS-4018
HS-4019
Advertisement
Table of Contents
