Table of Contents
Advertisement
https://appliancetechmanuals.com
J. Removal and Replacement of Condensate Pump
1) Move the power switch to the "OFF" position, then unplug the unit.
2) Remove the control box cover, then disconnect the condensate pump wires.
3) Remove the condensate pump.
4) Place the new condensate pump in position and connect the wires.
5) Route the condensate pump tubing.
6) Plug the unit back in. Move the power switch to the "ON" position.
Condensate Pump
Float Switch
Control Box
Fig. 11
45
Advertisement
Table of Contents
