Table of Contents
Advertisement
Engine Oil Levels
Check the oil level in the engine when the machine is
standing level and the engine is stopped.
Remove the dipstick, wipe it clean, and then replace it.
The dipstick should not be screwed into place.
Take the dipstick out again and read the oil level.
The oil level should lie between the markings on the
dipstick. If the level is approaching the "ADD" mark, fill
the oil to the "FUll" mark on the dipstick.
Never fill to above the "FULL" mark.
The oil is filled through the hole for the dipstick.
Engine oil SAE 30 or SAE10W-30 or alternatively, at
10W-40 class SF-SJ (over +32°F / 0°C).
Over 68°F / +20° SAE 40 can be used.
Use engine oil SAE 5W-20, class SF-SJ (under +32°F
/ 0°C).
The engine holds 1.6 qt (1.7 liters) of oil excluding
the filter, including filter 1.7 qt (1.9 liters).
40 - Husqvarna
lUBRICATIoN
Remove the dipstick
Remove the dipstick
Dipstick markings
Dipstick markings
8062-015
8062-031
8009-159
8009-159
Advertisement
Table of Contents
