Steps
1. Align the screw holes on the riser card with the screw holes on the chassis.
2. Replace the two (M3x5) screws to secure the riser card to the chassis.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
hard-drive
About this task
The following image(s) indicate the location of the wireless card and provide a visual representation of the removal procedure.
24
Removing and installing components
after working inside your
before working inside your
assembly.
computer.
computer.